Remove/install detachable parts on left rear-end door for repairing body/painting

AR60.00-D-0009TS

22.10.2018

Model

907.6/7, 910.6

Shown on model 907 with code D03 (Roof and rear-end doors, high version)

D60.00-A004-06

 	Remove/install
1	Remove license plate lamp bracket (2) at rear-end door (1).
2	Remove license plate bracket (3).
3	Remove bearing bracket.		AR72.20-D-4014TS
4	Remove lower door trim (4).	Model 907.6/7 with code VA5 (Fully lined hinged rear doors)	AR72.20-D-6615TS
5	Remove upper door trim (4).	Model 907.6/7 with code VA5 (Fully lined hinged rear doors)	AR72.20-D-6616TS
6	Remove door trims (4).	Model 907.6/7 except code VA5 (Fully lined hinged rear doors) Model 910.6	AR72.20-D-6619TS
7	Remove rotary tumblers (7) for lock striker.	 To do this, unscrew screw/bolts.
		 Removal: Mark positions of screws.
		 Installation: Observe markings of screws.
		 Screw, rotary tumbler to top of rear-end door	*BA72.20-N-1001-01TS
		 Screw, rotary tumbler to bottom of rear-end door	*BA72.20-N-1002-01TS
8	Remove lock striker (9).	 To do this, unscrew screw/bolts.
		 Bolt of striker to rear-end door	*BA72.20-N-1004-01TS
9	Remove seal (8).
10	Remove model plate using suitable tool.	If installed.
11	Remove rear window (5).	Model 907.6/7, 910.6 with a window in rear-end door without heated rear window	AR67.20-D-5145TSB
		Model 907.6/7, 910.6 with a window in rear-end door and with heated rear window	AR67.20-D-5145TS
12	Remove boot (10) from rear-end door (1).
13	Install in the reverse order.

 Rear-end door

Number	Designation		Model 907.6/7, 910.6
BA72.20-N-1001-01TS	Screw, rotary tumbler to top of rear-end door	Nm	13

 Rear-end door

Number	Designation		Model 907.6/7, 910.6
BA72.20-N-1002-01TS	Screw, rotary tumbler to bottom of rear-end door	Nm	10

 Rear-end door

Number	Designation		Model 907.6/7, 910.6
BA72.20-N-1004-01TS	Bolt of striker to rear-end door	Nm	20