Remove/install rear-end door trim

AR72.20-D-6615TS

Remove/install rear-end door trim

15.02.2018

Model

907.6/7

with code VA5 (Fully lined hinged rear doors)

Shown on right door trim (1)

1

Door trim

2

Retaining clip (x 14)

3

Decoupling ring

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove inner door handle with connected cables from right rear-end door

When removing right door trim (1).

AR72.20-D-4076TS

2

Unclip door trim (1) at retaining clips (2) from inner door panel

 14 retaining clips (2) are installed on right door trim (1).
15 retaining clips (2) are installed on left door trim (1).

 Clip remover

*452589016300

3.1

Remove door trim (1)

When removing left door trim (1).

3.2

Guide inner door handle out of door trim (1) and remove door trim (1)

When removing right door trim (1).



Check

4

Check retaining clips (2) and decoupling rings (3) for damage

If a retaining clip (2) or a decoupling ring (3) is damaged.



Replace corresponding retaining clip (2).

5

Install in the reverse order