Remove/install inner door handle on rear-end door

AR72.20-D-4076TS

Remove/install inner door handle on rear-end door

14.12.2018

Model

907.6/7, 910.6

1

Clip remover

2

Door handle

3

Catch hook

4

Long wedge

5

Catch hook

2

Door handle

6

Cables

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Remove

1

Insert clip remover (1) from above between door trim and door handle (2) and unclip catch hook (3) (arrow A).

 To unclip catch hook (3), slightly turn  clip remover (1).

 Clip remover

*452589016300

2

Insert long wedge (4) from underneath between door trim and door handle (2), unclip catch hook (5) (arrow B) and carefully pull door handle (2) to the side (arrow C).

 Long wedge

*115589035900

3

Remove clip remover (1) and long wedge (4).

4

Remove door handle (2) from rear-end door until cables (6) can be accessed.

5

Remove cables (6) from door handle (2) and remove door handle (2).



Install

6

Install cables (6) on door handle (2).

7

Position door handle (2) on rear-end door and carefully slide to the side (arrow D) until catch hooks (3, 5) engage in inner door panel.



Check

8

Perform function check of door handle (2).