ar7220d6616ts

Remove, install inner door lining on rear door window frame

Typ ar · temat 72.20 · wersja 0100 · 2018-04-06

Dotyczy: Model 907.6/7 with code VA5 (Fully lined hinged rear doors)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.20 Drzwi na ścianie tylnej, drzwi tylne — Seria 907 (modele 6**, 7**)

EinPAS 37 Wyposażenie wnętrza › 37.45 Okładzina › 37.45.31 Okładzina drzwi — Seria 907 (modele 6**, 7**)

AR72.20-D-6616TS

Remove, install inner door lining on rear door window frame

16.03.2018

Model

907.6/7

with code VA5 (Fully lined hinged rear doors)

Remove, install inner door lining on rear door window frame

D72.20-1270-79

Shown on left rear-end door

1

Cover

3

Retaining clamp

2

Retaining clips

4

Retaining clamp

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Unclip trim (1) at retaining clips (2) and retaining clamps (3) from window frame and remove.

If trim (1) at right rear-end door is removed.

Installation: Replace damaged retaining clips (2) and/or retaining clamps (3).

Clip remover

*452589016300

2

Unclip trim (1) at retaining clips (2) and retaining clamps (3, 4) from window frame and remove.

If trim (1) at left rear-end door is removed.

Installation: Replace damaged retaining clips (2) and/or retaining clamps (3, 4).

Clip remover

*452589016300

3

Install in the reverse order.

Remove, install inner door lining on rear door window frame

452 589 01 63 00

Clip remover

Powiązane dokumenty