Remove/install rear axle speed sensor

AR42.30-D-0714F

Remove/install rear axle speed sensor

4.5.15

Model

909

1

Screw

2

Rpm sensor

3

Heat-shrinkable sleeve

4

Heat-shrinkable tube



Remove

1

Remove corresponding wheel and tire assembly from rear axle

AR40.10-D-1100F

2

Remove screw/bolt (1) and pull rpm sensor (2) out of mounting hole in axle tube

3

Cut through line of rpm sensor (2) at easily accessible point

Only when replacing the rpm sensor (2).



Install

 Danger !

Risk of injury caused by burns to skin and eyes. Risk of poisoning caused by inhaling fumes when working with heat-shrinkable tubing.

Work in well ventilated rooms only. Wear safety glasses with side protection and protective gloves.

AS00.19-Z-0001-01A

4

Connect separated line of rpm sensor (2) using heat-shrinkable sleeves (3) and heat-shrinkable tube (4)

Only when replacing the rpm sensor (2).

AR42.30-D-0712-01F



000 588 00 84 00 Heat gun

WS54.00-P-0049B

 Wiring harness repair kit, basic

*000589139900

 New passenger car wiring harness repair kit

*220589049900

5

Position rpm sensor (2) in mounting hole in axle tube and tighten screw/bolt (1)

 Screw/bolt, ABS sensor to rear axle

*BA42.30-N-1002-02B

6

Install in the reverse order

 Rear axle rpm sensor

Number

Designation

Model 909

BA42.30-N-1002-02B

Screw/bolt, ABS sensor to rear axle

Nm

8