Remove/install front rear axle differential mounting on rear axle carrier

AR35.10-P-0058MSA

Remove/install front rear axle differential mounting on rear axle carrier

26.10.2018

Model

257, 290 with engine 256

4

Rear axle carrier

8

Transmission mounting

50

Rear axle gear

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on repair work on suspension components

AH00.00-P-0100-01A

 

Remove/install

1

Release and lower rear axle carrier (4) until screw of adapter on front crossbeam is accessible.

Model 290 with engine 256

AR35.10-P-0010FRX

Model 257 with engine 256

AR35.10-P-0010FR

2

Remove rear axle differential (50) from transmission suspension (8).

 Installation: Install spacer rings.

 Rear axle differential to front adapter

*BA35.10-P-1005-01H

3

Detach transmission suspension (8) from rear axle carrier (4) and remove transmission suspension (8).

 Bolt, adapter to front transverse bridge

*BA35.10-P-1004-01H

4

Install in the reverse order.

5

Measure articulation angle of rear propeller shaft relative to rear axle differential (50) and correct if necessary.

Model 290 with engine 256

AR41.10-P-0086MNI

Model 257 with engine 256

AR41.10-P-0086MSA

 Rear axle carrier

Number

Designation

Model 257

Model 290

BA35.10-P-1004-01H

Bolt, adapter to front transverse bridge

Nm

150

-

 Rear axle carrier

Number

Designation

Model 257

Model 290

BA35.10-P-1005-01H

Rear axle differential to front adapter

Rear axle differential (steel)

Nm

-

-

Rear axle differential (aluminum)

Stage 1

Nm

40

-

Stage 2

°

45

-