Remove/install throttle control cable

AR30.10-S-3400A

10.3.10

ENGINES 111 in MODEL 638

S30.10-3009-06

1 Throttle control cable

2 Fulcrum lever

3 Bearing bracket adjustment

4 Rubber pad

5 Accelerator pedal

6 Retaining clip

7 Pin

"A" Clearance

 	Remove/install
1	Unhook adjustment cable (1) on slotted lever (2) and bearing bracket adjustment (3)		AR30.10-S-3070-02A
2	Unhook adjustment cable (1) from accelerator pedal (5)	 Note distance "a" and installation position of holding clip (6)	AR30.10-S-3400-01A
			*BE30.12-N-1001-01A
3	Pull adjustment cable (1) out of rubber bumper (4) in firewall and remove engine compartment	 Check condition of rubber bumper (4), replace if necessary. Coat inside of rubber bumper (4) with grease
			*BR00.45-Z-1001-06A
4	Install in the reverse order
5	Grease cable of adjustment cable (1)		*BR00.45-Z-1006-06A
6	Adjust linkage		AR30.10-S-1010A

Test values for throttle control - chassis-side

Number	Designation			Engine 111.948 111.978


BE30.12-N-1001-01A	Clearance	Center of plain bearing for adjustment cableadjusting nut	mm	262

Repair materials

Number	Designation	Order number
BR00.45-Z-1006-06A	Anti-corrosion grease 40 g / DB supply specification 6834.00	A 001 989 37 51 10
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51 11