ar2020s3865ea

Remove/install radiator

Typ ar · temat 20.20 · wersja 0100 · 2019-08-16

Dotyczy: Engine 654.9 in model 447

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 20 Chłodzenie silnika › 20.20 Chłodnica, przewody elastyczne płynu chłodzącego — Seria 447 · Seria 654 (modele 9**)

EinPAS 15 Silnik › 15.25 Układ chłodzenia silnika › 15.25.31 Chłodnica silnika — Seria 447 · Seria 654 (modele 9**)

AR20.20-S-3865EA

Remove/install radiator

17.07.2019

Engine

654.9 in model 447

Remove/install radiator

Shown with CODE HH4 (THERMOTRONIC automatic air conditioning)

1.1

Radiator

2

Refrigerant condenser

3.1

Cooler holder left

3.2

Cooler holder right

S20.20-A015-76

Remove/install radiator

1.1

Radiator

3.1

Cooler holder left

3.2

Cooler holder right

4

Screw

S20.20-A016-76

Remove/install radiator

1.1

Radiator

1.2

Radiator

3.1

Cooler holder left

3.2

Cooler holder right

S20.20-A017-76

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Remove/install

1

Remove radiator unit.

AR20.20-S-3871EA

2

Remove fan unit.

AR20.40-S-5050EA

3

Release catch hooks (arrows) on left and right and remove refrigerant condenser (2).

Engine 654.9 in model 447
with code HH4 (THERMOTRONIC automatic climate control)
Engine 654.9 in model 447
with code HH9 (Air conditioner, automatic heater control)

AR83.30-S-0013EA

Installation: Insert refrigerant condenser (2) in upper guides on left cooler holder (3.1) and right cooler holder (3.2).

4

Remove screws (4) from left cooler holder (3.1) and right cooler holder (3.2).

5

Guide cooler (1.1) out of guides in left cooler holder (3.1) and right cooler holder (3.2) and remove.

6

Remove cooler (1.2) from left cooler holder (3.1) and right cooler holder (3.2).

7

Install in the reverse order.

Powiązane dokumenty