Remove/install radiator

AR20.20-S-3865EA

Remove/install radiator

17.07.2019

Engine

654.9 in model 447

Shown with CODE HH4 (THERMOTRONIC automatic air conditioning)

1.1

Radiator

2

Refrigerant condenser

3.1

Cooler holder left

3.2

Cooler holder right

1.1

Radiator

3.1

Cooler holder left

3.2

Cooler holder right

4

Screw

1.1

Radiator

1.2

Radiator

3.1

Cooler holder left

3.2

Cooler holder right

 Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

 

Remove/install

1

Remove radiator unit.

AR20.20-S-3871EA

2

Remove fan unit.

AR20.40-S-5050EA

3

Release catch hooks (arrows) on left and right and remove refrigerant condenser (2).

Engine 654.9 in model 447
with code HH4 (THERMOTRONIC automatic climate control)
Engine 654.9 in model 447
with code HH9 (Air conditioner, automatic heater control)

AR83.30-S-0013EA

 Installation: Insert refrigerant condenser (2) in upper guides on left cooler holder (3.1) and right cooler holder (3.2).

4

Remove screws (4) from left cooler holder (3.1) and right cooler holder (3.2).

5

Guide cooler (1.1) out of guides in left cooler holder (3.1) and right cooler holder (3.2) and remove.

6

Remove cooler (1.2) from left cooler holder (3.1) and right cooler holder (3.2).

7

Install in the reverse order.