ar1820d3471b

Removing and installing oil filter housing

Typ ar · temat 18.20 · wersja 0103 · 1999-09-07

Dotyczy: ENGINE 602.984 in MODEL 667, 668, 670 ENGINE 602.985 in MODEL 668, 670

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 18 Układ smarowania silnika, układ chłodzenia oleju › 18.20 Filtr oleju — Seria 602 (modele 984, 985) · Seria 667 · Seria 668 · Seria 670

EinPAS 15 Silnik › 15.20 Układ smarowania silnika › 15.20.31 Filtr/chłodzenie/termostat/wentylator/zbiornik — Seria 602 (modele 984, 985) · Seria 667 · Seria 668 · Seria 670

AR18.20-D-3471B

Removing and installing oil filter housing

6.8.96

ENGINE 602.984 in MODEL 667, 668, 670

ENGINE 602.985 in MODEL 668, 670

Removing and installing oil filter housing

D18.30-0002-09

Removal, installation

1

Take off engine trim panel in interior

Danger!

Risk of injury to skin and eyes from scalding from hot coolant which splashes out. Risk of poisoning from swallowing coolant.

Do not open the cooling system unless the coolant temperature is below 90 °C. Open cap slowly and allow the pressure to release. Do not pour coolant into containers for drinks.

Wear protective gloves, protective clothes, and eye protection.

AS20.00-Z-0001-01A

2

Drain coolant

AP20.00-D-2080-01B

3

Remove oil filter element (1)

Allow oil to flow out of oil filter housing

AP18.00-D-0101A

4

Disconnect electric cable at oil pressure switch (14)

5

Unscrew securing bolts (12, 13)

*BA18.20-N-1002-01A

6

Remove heat exchanger (3) with oil filter housing

Collect remaining oil which flows out

Installing: replace seals (2)

7

Unscrew bolts (11) connecting heat exchanger and oil filter housing (2)

*BA18.30-N-1001-01E

8

Take oil filter housing (2) off oil-water heat exchanger (6)

Collect oil which flows out, replace seals (9, 10, 14) and insert into the connection fittings at oil-water heat exchanger (6)

9

Install in the reverse order

10

Inspect engine oil level, adjust to correct level if necessary

AP18.00-D-0101A

11

Inspect cooling system for leaks

AR20.00-D-1010A

Oil filter

Number

Designation

Engine 602.984/
985

BA18.20-N-1002-01A

Oil filter housing to crankcase

Nm

25

Oil cooling

Number

Designation

Engine 602.984/
985/980

BA18.30-N-1001-01E

Oil-water heat exchanger to housing

Nm

10

Powiązane dokumenty