ar0704s7007a

Removing and installing electronic diesel system (EDS) temperature sensor

Typ ar · temat 07.04 · wersja 0100 · 1998-07-06

Dotyczy: ENGINE 601.970 in MODEL 638.074 /174 /274 with CODE (MS5) Low emission engine stage II

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.04 Czujniki — Seria 601 (modele 970) · Seria 638 (modele 074, 174, 274)

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 601 (modele 970) · Seria 638 (modele 074, 174, 274)

AR07.04-S-7007A

Removing and installing electronic diesel system (EDS) temperature sensor

13.10.97

ENGINE 601.970 in MODEL 638.074 /174 /274 with CODE (MS5) Low emission engine stage II

Removing and installing electronic diesel system (EDS) temperature sensor

S07.12-2532-06

B90 Temperatur sensor

Removing, installing

Danger!

Risk of injury to skin and eyes from scalding from hot coolant which splashes out. Risk of poisoning from swallowing coolant.

Do not open the cooling system unless the coolant temperature is below 90 °C. Open cap slowly and allow the pressure to release. Do not pour coolant into containers for drinks.

Wear protective gloves, protective clothes, and eye protection.

AS20.00-Z-0001-01A

1

Drain coolant

AP20.00-D-2080A

2

Unplug connector at temperature sensor (B90)

3

Remove temperature sensor (B90) at cylinder head

*BA07.04-N-1002-01A

4

Install in the reverse order

5

Inspect cooling system for leaks

AR20.00-S-1010B

Mixture formation senders, pickups, sensors

Number

Designation

Engine 601.970 with code MS5

BA07.04-N-1002-01A

Temperature sensor to cylinder head

Nm

20

Powiązane dokumenty