ar0330s1700ef

Remove/install belt pulley

Typ ar · temat 03.30 · wersja 0201 · 2018-04-16

Dotyczy: Model 447 with engine 622

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 03 Zespół napędowy › 03.30 Koło zamachowe, tarcza zabieraka, tłumik drgań, wieniec zębaty rozrusznika — Seria 447 · Seria 622

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.41 Wał korbowy/ koło zamachowe/ tarcza sprzęgła — Seria 447 · Seria 622

EinPAS 15 Silnik › 15.18 Napęd paskowy › 15.18.30 Pasek/koło pasowe/koło bierne/napinacz — Seria 447 · Seria 622

AR03.30-S-1700EF

Remove/install belt pulley

16.03.2018

Model

447 with engine 622

Modification notes

13.02.2018

Information added

Operation step 2

Remove/install belt pulley

S03.30-4518-09

1

Belt pulley

2

Screw

3

Thrust piece

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Remove/install

1

Remove poly-V-belt from belt pulley (1).

AR13.22-S-1202EF

2

Remove belt pulley (1).

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Unscrew screw/bolt (2) to do this.

Installation: Replace screw/bolt (2). Ensure correct installation position of the thrust piece (3).

Bolt, belt pulley to crankshaft

*BA03.30-N-1001-01BA

Counterholder

*626589024000

If necessary,

turn belt pulley (1) into a suitable position to counterhold.

Check

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

3

Check front radial shaft sealing ring for damage and leakage.

If damage or leakage is present,

replace front radial shaft sealing ring.


AR03.20-S-3000EF

4

Install in the reverse order

Flywheel, belt pulley

Number

Designation

Engine 622 in model 447

BA03.30-N-1001-01BA

Bolt, belt pulley to crankshaft

Stage 1

Nm

50

Stage 2

°

150

Remove/install belt pulley

626 589 02 40 00

Counterholder

Powiązane dokumenty