ar0320d3000na

Replace front crankshaft radial seal

Typ ar · temat 03.20 · wersja 0103 · 2003-11-24

Dotyczy: ENGINE 612.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA ENGINE 612.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) Nation

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 03 Zespół napędowy › 03.20 Wał korbowy — Seria 647 (modele 981) · Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.41 Wał korbowy/ koło zamachowe/ tarcza sprzęgła — Seria 647 (modele 981) · Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

Dotyczy też silników/skrzyń biegów: 612 981

AR03.20-D-3000NA

Replace front crankshaft radial seal

15.1.01

ENGINE 612.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

ENGINE 612.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

ENGINE 647.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Replace front crankshaft radial seal

D03.20-1101-06

1 Crankshaft radial seal ring

2 Belt pulley/vibration damper

3 Insertion tool

4 Washer

5 Screw

Remove/Install

1

Remove belt pulley/vibration damper (2)

AR03.30-D-1600NA

2

Use a screwdriver to press out crankshaft radial seal (1)

Do not damage crankshaft and mounting hole for crankshaft radial seal (1). Use a clean cloth as a base.

Installation: Install front crankshaft radial sealing ring (1)

AR03.20-P-3000-01C

*611589001400

3

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

4

Inspect for oil leaks

Run engine until warm, switch off and inspect for leaks.

Replace front crankshaft radial seal

611 589 00 14 00

Insertion tool

Powiązane dokumenty