ar0320d3000na

Replace front crankshaft radial seal

Type ar · topic 03.20 · version 0103 · 2003-11-24

Applies to: ENGINE 612.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA ENGINE 612.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) Nation

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.20 Crankshaft — Series 647 (models 981) · Series 903 (models 61*, 62*, 66*, 67*) · Series 904 (models 61*, 62*, 66*)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 647 (models 981) · Series 903 (models 61*, 62*, 66*, 67*) · Series 904 (models 61*, 62*, 66*)

Also applies to engines/gearboxes: 612 981

AR03.20-D-3000NA

Replace front crankshaft radial seal

15.1.01

ENGINE 612.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

ENGINE 612.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

ENGINE 647.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Replace front crankshaft radial seal

D03.20-1101-06

1 Crankshaft radial seal ring

2 Belt pulley/vibration damper

3 Insertion tool

4 Washer

5 Screw

Remove/Install

1

Remove belt pulley/vibration damper (2)

AR03.30-D-1600NA

2

Use a screwdriver to press out crankshaft radial seal (1)

Do not damage crankshaft and mounting hole for crankshaft radial seal (1). Use a clean cloth as a base.

Installation: Install front crankshaft radial sealing ring (1)

AR03.20-P-3000-01C

*611589001400

3

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

4

Inspect for oil leaks

Run engine until warm, switch off and inspect for leaks.

Replace front crankshaft radial seal

611 589 00 14 00

Insertion tool

Referenced documents