SI07.03-W-0002A | Service information: Work on high-pressure lines to rail | 10.5.12 |
ENGINES 471.9 in MODEL 963
W07.16-1141-12
1 Vibration damper
2 Clip
3 High pressure pipe
4 Bracket
Please note that removed high-pressure lines (3) and the removed bracket (4) are not to be reused.
If, during repair work, the bracket (4) or one of the two high-pressure lines (3) is removed, the bracket (4), both high-pressure lines (3), both clamps (2) and both vibration dampers (1) must always be replaced.
The parts to be replaced are listed in the high-pressure line parts kit (see Parts ordering notes).
The repair instructions concerned have been revised and will be published in the WIS with release 06/2012.
Install/remove test adapter for return quantity of pressure transducer | |||
Install/remove test adapter for return quantity of nozzle needle valves | |||
Install/remove test adapter for return quantity of pressure limiting valve | |||
Remove/install high pressure line to rail |
Parts ordering notes
Part no. | Designation | Quantity |
A 471 070 24 35 | High-pressure line parts kit | 1 |
참조 문서
- ar0716w0150h 압력 변환기의 리턴량 측정 시 XENTRY용 테스트 어댑터 탈, 장착
- ar0716w0155h 노즐 니들 밸브의 리턴량 측정 시 XENTRY용 테스트 어댑터 탈, 장착
- ar0716w0160h 압력 제한 밸브의 리턴량 측정 시 XENTRY용 테스트 어댑터 탈, 장착
- ar0716w1004h 레일에 연결된 고압 라인 탈, 장착