ar4710d4100ng

Remove/install fuel tank

유형 ar · 주제 47.10 · 버전 0100 · 2009-07-22

적용 대상: MODEL 906 with ENGINE 271.951 with CODE (MZ8) NGT engine EEV

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 47 연료 시스템, 드라이브 트레인 에너지 공급 › 47.10 연료탱크 — 시리즈 906

EinPAS 16 연료/에너지 공급, 엔진 › 16.10 연료 공급 › 16.10.40 연료 탱크/주입 장치 — 시리즈 906

엔진/변속기에도 적용: 271 951

AR47.10-D-4100NG

Remove/install fuel tank

16.7.09

MODEL 906 with ENGINE 271.951 with CODE (MZ8) NGT engine EEV

Remove/install fuel tank

D47.10-1143-09

1 Fuel tank

2 Fuel pipe

3 Purge line

7 Screw clamp

8 Hose

9 Filler neck

4 Fuel pipe

5 Electrical line

6 Tensioning strap

Remove/install fuel tank

D47.10-1144-06

1 Fuel tank

3 Purge line

5 Electrical line

10 Vent line

11 Electrical connector

M3/6 Fuel pump with fuel tank sensor

Remove/install

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel

No fire, sparks, open flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Drain fuel tank (1)

AR47.10-S-4001S

2

Lift/jack up vehicle

AR00.60-D-1000H

3

Unlock fuel line (2) and remove from fuel line (4)

Collect fuel which runs out in a suitable container.

4

Loosen screw clamp (7) and slide in direction of filler neck (9)

5

Support fuel tank (1) in center with telescopic lifter and transmission plate.

Transmission jack 0.5 t

gotis://H_00.10_01.0

Passenger car transmission platform

gotis://A_25/35/49_02.0

6

Remove tensioning straps (6)

*BA47.10-N-1002-01E

7

Lower transmission jack with fuel tank (1) and remove hose (8) from fuel tank (1)

Aid of helper required.

Lower transmission jack with fuel tank (1) only until vent line (10), purge line (3) and electrical connector (11) are accessible on fuel pump with fuel level sensor (M3/6).

8

Expose purge line (3) and electrical line (5) and remove from fuel tank (1)

Purge line (3) and electrical line (5) remain in vehicle.

9

Remove vent line (10) from fuel tank (1)

Vent line (10) remains in vehicle.

10

Disconnect electrical connector (11)

11

Lower transmission jack with fuel tank (1) and suction off remaining fuel from fuel tank (1)

Fuel pump (for pumping from supply tank) gasoline / diesel

gotis://D_47_02.0

12

M3/6 Remove existing fuel pump with fuel level sensor

Only when installing new fuel tank (1).

AR47.20-D-7000NG

13

Remove remaining fuel lines, fuel filter and vent lines

Only when installing new fuel tank (1).

14

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

15

Perform engine test run and check fuel system in the area of the fuel tank (1) for leaks

Fuel tank

Number

Designation

Model
906 with engine 271.951 with code MZ8

BA47.10-N-1002-01E

Bolt, fuel tank tensioning strap to longitudinal member

Nm

56

참조 문서