ar4330t0001b

Remove/install proportioning valve

유형 ar · 주제 43.30 · 버전 0108 · 2012-02-21

적용 대상: MODEL NMB613.355 with TRANSMISSION 714.66 with CODE (B10) Voith retarder R115 (integrated) Voith Retarder VR 115 E - 153.000188xx, H67.1500xx MODEL NMB613.355 /365 /455 /485 with TRANSMISSION 714.69 with CODE (B10) Voith retarder R115 (integrated) Voith Retarder VR 115 E - 153.000188xx, H67.1500xx MODEL NMB613.364 with TRANSMISSION 714.120 with CODE (B10) Voith retarder R115 (integrated) Voith Retarder VR 115 E - 153.000188xx, H67.1500xx MODEL NMB613.358 /388 with TRANSMISSION 714.140 with CODE (B10)

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 43 브레이크-공압장치 및 보조브레이크 › 43.30 리타더 (유압식) — 시리즈 613 (모델 355, 358, 364, 365, 388, 455, 485)

EinPAS 21 브레이크/진공압 시스템/압축 공기 시스템 › 21.21 리타더 › 21.21.13 라인/호스/밸브 — 시리즈 613 (모델 355, 358, 364, 365, 388, 455, 485)

엔진/변속기에도 적용: 714 120, 714 140, 714 66*, 714 69*


AR43.30-T-0001B

Remove/install proportioning valve

15.2.12

MODEL NMB613.355 with TRANSMISSION 714.66 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

MODEL NMB613.355 /365 /455 /485 with TRANSMISSION 714.69 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

MODEL NMB613.364 with TRANSMISSION 714.120 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

MODEL NMB613.358 /388 with TRANSMISSION 714.140 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

Remove/install proportioning valve

T43.30-0012-11

1 Connector

2 Compressed air connector

3 Proportioning valve

4 Sound insulation plate

5 Screw

6 Nut

7 O-ring

Remove/install

Danger!

Risk of injury caused by touching hot retarder and by scalding from hot retarder oil. Risk of injury to skin or eyes caused by retarder oil escaping under high pressure

Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder.

AS43.30-Z-0001-01A

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect electric cables at battery

For models 613.355/364/365/455/485,

For model 613.358/388

AR54.18-T-0002BA

Notes on battery

All models

AH54.10-P-0001-01A

2

Release reservoir air from compressed air system

3

Remove connector (1) on proportioning valve (3)

4

Remove compressed-air connector (2)

For compressed-air connector
"VOSS 230".

AR42.10-W-0900A

For compressed-air connector
"VOSS 232" (NG 8, NG 12) or "Schäfer SDF" (NG 6).

AR42.10-W-0900C

5

Detach proportioning valve (3)

Installation: Use new nuts (6).

*BA43.30-N-1008-01D

*001589752100

6

Remove damping plate(4)

Installation: Use new bolts (5) and
O-rings (7).

*BA43.30-N-1007-01D

*000589642100

Checking

7

Check damping plate (4)

For mechanical and age-related damage, replace subject to separate repair order.

8

Install in the reverse order

Retarder (hydraulic)

Number

Designation

Model 613
with code B10

BA43.30-N-1007-01D

Bolt, damping plate to oil reservoir cover

M8

Nm

30

BA43.30-N-1008-01D

Nut proportional valve on damping plate

M8

Nm

18

Remove/install proportioning valve
Remove/install proportioning valve

001 589 75 21 00

Torque wrench

Torque wrench

000 589 64 21 00

참조 문서