ar4330g0001oha

Remove/install proportioning valve

유형 ar · 주제 43.30 · 버전 0101 · 2019-11-27

적용 대상: Model 000.001 with transmission 714.140/143 Transmission with hydrodynamic retarder R115 E (integrated), Voith- 153.000188xx, H67.1500xx

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 43 브레이크-공압장치 및 보조브레이크 › 43.30 리타더 (유압식) — 시리즈 000 (모델 001)

EinPAS 21 브레이크/진공압 시스템/압축 공기 시스템 › 21.21 리타더 › 21.21.13 라인/호스/밸브 — 시리즈 000 (모델 001)

엔진/변속기에도 적용: 714 140, 714 143

AR43.30-G-0001OHA

Remove/install proportioning valve

18.11.2019

Model

000.001 with transmission 714.140/143

Transmission with hydrodynamic retarder R115 E (integrated), Voith- 153.000188xx, H67.1500xx

Remove/install proportioning valve

1

Connector

2

Compressed air connector

3

Proportioning valve

4

Sound insulation plate

5

Screw

6

Nut

7

O-rings

T43.30-0012-11

Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Topical note

Notes on battery

AH54.10-P-0001-01A

Remove/install

1

Detach ground line of on-board electrical system battery

See information from vehicle manufacturer.

2

Release supply air from compressed-air system

See information from vehicle manufacturer.

3

Detach plug (1) from proportional valve (3)

4

Detach compressed air connector (2)

5

Unscrew nuts (6) and remove proportional valve (3)

Installation: Use new nuts (6).

Nut, proportional valve to damping plate

*BA43.30-N-1023-01H

6

Unscrew screws (5) and remove damping plate (4)

Installation: Check damping plate (4) for damage and replace if necessary.
Use new screws (5) and new O-rings (7).

Bolt, damping plate to oil reservoir cover

*BA43.30-N-1022-01H

7

Install in the reverse order

Hydrodynamic retarder

Number

Designation

Model 000.001
with hydrodynamic retarder

BA43.30-N-1022-01H

Bolt, damping plate to oil reservoir cover

M8

Nm

30

Hydrodynamic retarder

Number

Designation

Model 000.001
with hydrodynamic retarder

BA43.30-N-1023-01H

Nut, proportional valve to damping plate

M8

Nm

18

참조 문서