N20.20-2049-06
1 Radiator
2 Drain plug
3 Coolant pipe
4 Coolant hose
5 Charge air hose
6 Charge air cooler
7 Coolant hose
8 Coolant hose
9 Coolant hose
10 Supporting strut
11 Bracket
12 Frame
13 Rubber mounts
14 Bracket
15 Fan shroud
| Remove/install | ||
Danger! | Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning caused by swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. | |
| Notes on coolant | ||
1 | Drain off coolant at drain plug (2) of coolant pipe (3) | Collect coolant | |
| Replace coolant | ||
2 | Remove coolant hose (4) | Collect coolant | |
3 | Mark charge air hoses (5) and remove on charge air cooler (6) | Installation: Note the installation position of the charge air hose (5). | |
4 | Detach coolant hose (7) at radiator (1) | Collect coolant | |
5 | Detach coolant hoses (8, 9) at the coolant pipe (3) | Collect coolant | |
6 | Detach supporting strut (10) at radiator (1) | ||
7 | Remove radiator (1) on holder (11) for | Installation: Check rubber mounts (13) for wear; replace if necessary. | |
8 | Detach left and right brackets (14) | ||
9 | Lift out radiator (1) with charge air cooler (6) upwards | Remove radiator (1) and | |
10 | Remove fan shroud (15) at radiator (1) | Only when replacing the radiator (1). | |
The fan shroud (15) is attached to both side cooler consoles with bolts. | |||
11 | Remove charge air cooler (6) from radiator (1) | Only when replacing the radiator (1). | |
The charge air cooler (6) is attached to both side cooler consoles with bolts. | |||
12 | Install in the reverse order | ||
13 | Inspect cooling system for leaks |
참조 문서
- ah2000n208001a 냉각수 지침
- ap2000i2080b
- ar2000i1010b
- as2000z000101a 뜨거운 냉각수 분출 시 입은 화상에 의한 피부와 안구의 상해 위험 냉각수의 음용으로 인한 중독 위험