ar0910p1150rt

Remove/install air filter housing

유형 ar · 주제 09.10 · 버전 0100 · 2005-07-14

적용 대상: ENGINE 113.971 in MODEL 251.075 /175

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 09 공기흡입, 차징 › 09.10 에어필터 — 시리즈 251 (모델 075, 175)

EinPAS 15 엔진 › 15.30 흡기/충전 › 15.30.40 에어 필터/에어 필터 박스 — 시리즈 251 (모델 075, 175)

엔진/변속기에도 적용: 113 971

AR09.10-P-1150RT

Remove/install air filter housing

6.6.05

ENGINE 113.971 in MODEL 251.075 /175

Remove/install air filter housing

P09.10-2165-04

1 Partition wall

2 Air filter housing

3 Intake air duct

4 Engine cover

5 Supports

6 Supports

Remove/install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Open engine hood

AR88.40-P-1000RT

2

Remove engine trim panel (4)

AR01.10-P-2405RT

3

Remove the left and the right intake air duct (3)

4

Remove partition (1)

AR62.30-P-2400RT

5

Detach the air filter housing (2) from the mounts (5, 6) at the left and right cylinder head cover from above

In order to avoid scratches and damage, the air filter housing (2) must be put down on a padded base.

6

Install in the reverse order

참조 문서