ar0110p2405rt

Remove/install engine cover

유형 ar · 주제 01.10 · 버전 0100 · 2005-07-12

적용 대상: ENGINE 113.971 in MODEL 251.075 /175

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 01 엔진 전체, 엔진 배기, 실린더 헤드, 실린더 크랭크케이스 › 01.10 엔진 전체 — 시리즈 251 (모델 075, 175)

EinPAS 15 엔진 › 15.15 연소 엔진 전체/엔진 블럭/크랭크 어셈블리 › 15.15.45 커버/패널 — 시리즈 251 (모델 075, 175)

엔진/변속기에도 적용: 113 971

AR01.10-P-2405RT

Remove/install engine cover

6.6.05

ENGINE 113.971 in MODEL 251.075 /175

Remove/install engine cover

P01.10-2721-07

1 Mounting clamp

2 Mounting clamps

3 Mounting clamps

Remove/install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Open engine hood

AR88.40-P-1000RT

2

Remove the partition wall between the wheelhouses

AR62.30-P-2400RT

3

Unclip the mounting clamps (1,2), to do this raise the engine cover slightly (arrows A)

When unclipping the engine cover, only lift gently in the area of the mounting clamps, otherwise the cover may break.

4

Unclip the mounting clamps (3), to do this, pull the engine cover slightly forwards

5

Remove engine cover

6

Install in the reverse order

참조 문서