S03.30-4518-09
1 | Belt pulley | 2 | Screw | 3 | Thrust piece |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Remove/install | ||
1 | Remove poly-V-belt from belt pulley (1). | ||
2 | Remove belt pulley (1). | ||
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | ||
Unscrew screw/bolt (2) to do this. | |||
Installation: Replace screw/bolt (2). Ensure correct installation position of the thrust piece (3). | |||
Bolt, belt pulley to crankshaft | |||
Counterholder | |||
If necessary, | |||
| |||
turn belt pulley (1) into a suitable position to counterhold. | |||
| Check | ||
Caution | Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. | |
3 | Check front radial shaft sealing ring for damage and leakage. | If damage or leakage is present, | |
| |||
replace front radial shaft sealing ring. | |||
4 | Install in the reverse order |
626 589 02 40 00
Counterholder
참조 문서
- ah0000p002001a 회전각 제어식 조임 절차에 따라 조여진 나사 체결부 관련 지침
- ar0320s3000ef
- ar1322s1202ef
- as0000z001001a 리프터에서 차량이 미끄러지거나 틸팅 시 생명의 위험
- as1800z000101a 엔진 오일 취급 시 피부와 안구의 상해 위험엔진 오일 음용으로 인한 중독 위험