P01.40-0299-06
D Bore for cylinder liner collar
D1 Bore for cylinder liner collar
D2 Bore for cylinder liner
T Cylinder liner seat to middle of basic bearing bore
T1 Deep cylinder liner seat
Machining | |||
1 | Drill out cylinder bore | Observe tool manufacturer's operating instructions, maintain dimensions in accordance with test and adjustment value | |
Bore (D2) | |||
O2 | Bore liner collar seat | Bore (D, D1) | |
Distance between cylinder liner collar seat in contact surface of crankshaft bearing cap (T) | |||
Depth of liner seat (T1) | |||
3 | Mill off web tips between the cylinders | ||
4 | Deburr crankcase with polishing stone at the chamfer | ||
5 | Clean crankcase thoroughly |
Inspection data for crankcase
Number | Designation | Engine | ||
BE01.40-N-1007-02D | Bore diameter for cylinder liner in crankcase | D2 | mm | 91.500...91.535 |
Fig. see | ||||
BE01.40-N-1008-02D | Bore diameter for cylinder liner collar in crankcase | D1 | mm | 92.05...92.15 |
D | mm | 94.15...94.25 | ||
Fig. see | ||||
BE01.40-N-1009-02D | Liner seat up to middle of basic bearing bore (T) | mm | 231.0...231.2 | |
Fig. see | ||||
BE01.40-N-1010-02D | Depth of liner seat (T1) | mm | 1.0...1.2 | |
Fig. see | ||||
BE01.40-N-1012-02D | Land width and peak-to-valley height between cylinder bores after machining cylinder bores | Land width (M) | mm | 35 |
Peak-to-valley height (RZ) | mm | 0.100 | ||
Fig. see | ||||
Inspection data for crankcase
Number | Designation | Engines | ||
BE01.40-N-1007-02D | Bore diameter for cylinder liner in crankcase | D2 | mm | 91.500...91.535 |
Fig. see | ||||
BE01.40-N-1008-02D | Bore diameter for cylinder liner collar in crankcase | D1 | mm | 92.05..92.15 |
D | mm | 94.15...94.25 | ||
Fig. see | ||||
BE01.40-N-1009-02D | Liner seat up to middle of basic bearing bore (T) | mm | 231.0...231.2 | |
Fig. see | ||||
BE01.40-N-1010-02D | Depth of liner seat (T1) | mm | 1.0...1.2 | |
Fig. see | ||||
BE01.40-N-1012-02D | Land width and peak-to-valley height between cylinder bores after machining cylinder bores | Land width (M) | mm | 50 |
Peak-to-valley height (RZ) | mm | 0.100 | ||
Fig. see | ||||