1 | Intake camshaft |
2 | Exhaust camshaft |
3 | Exhaust camshaft sprocket |
4 | Timing chain |
5 | Bolts |
D05.20-1124-06
| Remove/install | ||
1 | Remove cylinder head cover | ||
2 | Remove fan shroud | Only for code (H08) Heavy duty air conditioning | |
3 | Position piston of cylinder 1 to ignition TDC | ||
Remove retaining pin after adjustment operations from intake camshaft (1). | |||
Socket wrench bit | |||
Retaining pins | |||
4 | Remove front cover at cylinder head | ||
5 | Secure timing chain (4) with cable tie to exhaust camshaft sprocket (3) | ||
6 | Remove chain tensioner | ||
7 | Remove bolts (5) and remove exhaust camshaft sprocket (3) with mounted timing chain (4) | Installation: Replace screw/bolts (5). | |
Bolt, camshaft sprocket to exhaust camshaft | |||
8 | Remove camshaft bearing cap | ||
Topical note | Marking on camshaft bearing caps | ||
Observe identification of camshaft bearing cap. | |||
Screw/bolt, camshaft bearing cap to cylinder head | |||
9 | Remove intake camshaft (1) and exhaust camshaft (2) | Installation: Oil compensating elements in camshaft bearing points, check for ease of movement of compensating elements. Align intake camshaft (1) and exhaust camshaft (2) at axial bearing. Mount intake camshaft (1) and exhaust camshaft (2) so that both markings (arrows) face each other. | |
10 | Install in the reverse order |
111 589 03 15 00
Retaining pins
001 589 65 09 00
Socket wrench bit
参照文書
- ah0520p699204he カムシャフト·ベアリング·キャップ·コード
- ar0120d5014sd シリンダ·ヘッド·カバーの脱着
- ar0130d5700sd
- ar0310d704103sd
- ar0510d7800sd
- ar0520s699204sd カムシャフト·ベアリング·キャップの脱着
- ar2040d6800sd