AdBlue(R) tank - Check/correct fluid level · ap1440d1411a · Mercedes-Benz WIS

AP14.40-D-1411A

AdBlue(R) tank - Check/correct fluid level

29.05.2019

Engine

642.8, 651.9 in model 906

Modification notes

08.09.2015

"Clip drain hose onto AdBlue® tank" added

Operation step 6

AR14.40-D-2014-02S

AdBlue(R) tank - Check/correct fluid level

Show on MODEL 906.6 without CODE KP2 (AdBlue® tank, 12 l, in engine compartment) and without CODE XM0 (Model refinement)

1	Filler neck
2	Cap
8	AdBlue® tank
9	Drain hose (on vehicles without CODE KP2 (AdBlue® tank, 12 l, in engine compartment))
10	Plug (on vehicles without CODE KP2 (AdBlue® tank, 12 l, in engine compartment))

D14.40-0077-01

D14.40-0086-01

Illustration shows MODEL 906.1 without CODE KP2 (AdBlue® tank, 12 l, in engine compartment) and without CODE XM0 (Model refinement)

1	Filler neck
2	Cap
8	AdBlue® tank

D14.40-0160-01

 Warning	Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue	Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.	AS14.40-Z-0001-01A
 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
 Danger	Risk of accident caused by vehicle starting off on its own when jacked up. Risk of injury caused by rotating parts when working on running engine or drive train.	Ensure that jack stands are in a safe condition. An authorized person must occupy the driver's seat. Wear closed and close-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0008-01A
	Notes on use, material properties and handling of AdBlue®		AH14.40-N-0001-01A
	Check
1	Unscrew cap (2)
2	Add AdBlue® up to start of thread (arrow) of cap (2) on filler neck (1)
	Service Information: Fill AdBlue container	Engine 642.8, 651.9	SI14.40-S-0014A
	Approved NOx reducing agent AUS 32 ("ADBlue(R)")		BB00.40-P-0352-01A
		If the AdBlue® indicator lamp in the instrument cluster lights up:
		
		Drain AdBlue® and replace.
	Draining
3	Raise vehicle	Engine 642.898 in model 906.6/7 except code KP2 (AdBlue tank, 12 l, in the engine compartment) except code XM0 (Facelift)
			AR00.60-D-1000H
4.1	Drain AdBlue® from AdBlue® tank (8) at drain hose (9).	Engine 642.8 in model 906 except code KP2 (AdBlue tank, 12 l, in the engine compartment) except code XM0 (Facelift)
		Engine 642.8 with code MH1 (Low-emission engine EPA 10 / CARB), or with code MH3 (Low-emission engine EPA 13 / CARB)	AR14.40-D-2014-02S
		 Clean the drain hose (9) immediately and seal with the plug (10).
4.2	Suction off AdBlue® from AdBlue® tank (8)	Engine 642.8, 651.9 in model 906 with code KP2 (AdBlue tank, 12 l, in the engine compartment) with code XM0 (Facelift) Engine 642.896/898, 651.9 in model 906 with code KP2 (AdBlue tank, 12 l, in the engine compartment) except code XM0 (Facelift) Engine 642.898 in model 906.1/2 except code KP2 (AdBlue tank, 12 l, in the engine compartment) except code XM0 (Facelift)
		Engine 642.898 in model 906 with code KP2 (AdBlue tank, 12 l, in engine compartment), with code MH1 (Low-emission engine EPA 10 / CARB), or with code MH3 (Low-emission engine EPA 13 / CARB), except code XM0 (Model refinement)	AR14.40-D-2014-02A
	000 588 01 71 00 Extraction pump		WS14.00-P-0013B
		 Engine 642.898 in model 906.1/2 except code KP2 (AdBlue tank, 12 l, in the engine compartment) except code XM0 (Facelift) A reference document does not exist for these models.
	Pour in
5	Lower vehicle	Engine 642.898 in model 906.6/7 except code KP2 (AdBlue tank, 12 l, in the engine compartment) except code XM0 (Facelift)
			AR00.60-D-1000H
6	Add AdBlue® through the filler neck (1) up to start of thread (arrow) of cap (2)
	Approved NOx reducing agent AUS 32 ("ADBlue(R)")		BB00.40-P-0352-01A
		 Do not allow paper or anything similar to enter the filler neck (1) and AdBlue® container (8). There is a risk of damage to the AdBlue® system otherwise.
		 Clean area surrounding cap (2) on filler neck (1).
		 AdBlue® container and filler line	*BF14.40-N-1001-01A
7	Tighten cap (2) on filler neck (1)

 Filling capacity for BlueTEC (SCR) diesel exhaust treatment

Number	Designation			Engine 642 in model 906 with code KP2 (AdBlue tank, 12 l, in the engine compartment) with code MH1 (Low-emission engine EPA 10/CARB) Engine 642 in model 906 with code KP2 (AdBlue tank, 12 l, in the engine compartment) with code MH3 (Low-emission engine EPA 13/CARB)	Engine 642 in model 906.6/7 with code MH1 (Low-emission engine EPA 10/CARB) except code KP2 (AdBlue tank, 12 l, in the engine compartment) Engine 642 in model 906.6/7 with code MH3 (Low-emission engine EPA 13/CARB) except code KP2 (AdBlue tank, 12 l, in the engine compartment)
BF14.40-N-1001-01A	AdBlue® container and filler line	Filling capacity - initial filling	Liter	 12	 19
		Sheet		BB00.40-P-0352-01A	BB00.40-P-0352-01A

 Filling capacity for BlueTEC (SCR) diesel exhaust treatment

Number	Designation			Engine 642 in model 906 with code MA6 (Emissions category Euro 6b N1 GR.III/N2) Engine 642 in model 906 with code MB6 (Low-emission vehicle, Euro 6 Gr. 1) Engine 642 in model 906 with code MH5 (Low-emission engine EPA 14/CARB) Engine 642 in model 906 with code MH7 (Engine, low-emission EPA 16/CARB) Engine 642 in model 906 with code MP6 (Engine version, Euro VI) Engine 651 in model 906	Engine 642 in model 906.1/2 with code MH1 (Low-emission engine EPA 10/CARB) except code KP2 (AdBlue tank, 12 l, in the engine compartment) Engine 642 in model 906.1/2 with code MH3 (Low-emission engine EPA 13/CARB) except code KP2 (AdBlue tank, 12 l, in the engine compartment)
BF14.40-N-1001-01A	AdBlue® container and filler line	Filling capacity - initial filling	Liter	 18	 23
		Sheet		BB00.40-P-0352-01A	BB00.40-P-0352-01A

Documenti citati

ah1440n000101a Avvertenze sull'impiego, sulle caratteristiche e sulla manipolazione dell'AdBlue
ar0060d1000h Sollevare il veicolo, montarlo sui cavalletti
ar1440d201402a Svuotare, rifornire il serbatoio AdBlue
ar1440d201402s
as0000z000801a Pericolo di infortunio a causa di avvio autonomo durante interventi effettuati sul veicolo sollevato. Pericolo di lesioni a causa dei componenti rotanti liberamente durante interventi sul motore acceso o sulla catena cinematica
as0000z001001a Pericolo di morte in caso di scivolamento o di ribaltamento del veicolo dalla piattaforma di sollevamento
as1440z000101a Pericolo di ustioni e scottature dovute a liquido bollente durante i lavori sulle tubazioni AdBlue e sui componenti ad esse collegati. Pericolo di lesioni alla pelle e agli occhi durante la manipolazione di AdBlue. Pericolo di
bb0040p035201a Agenti riducenti di NOx AUS 32 ("ADBlue(R)") approvati
si1440s0014a Informazione per il Servizio Assistenza: rifornimento serbatoio AdBlue
ws1400p0013b 000 588 01 71 00 Pompa di aspirazione