AP09.10-B-0951G | Air filter element - checking fouling. Replace according to condition | 12.02.16 |
Vehicle 384, 386, 388, 660, 682, 693, 694, 695, 696
B09.10-0031-01
Mechanic maintenance indicator
1 Indicator device plunger
2 Release button
3 Display
B09.10-0022-01
Electric maintenance indicator
A Air filter saturation indicator pilot lamp
| Check | ||
| Run engine until coolant system water reaches service temperature | ||
Mechanic maintenance indicator | |||
1 | Check plunger position (1) in the maintenance indicator display (3) | As soon as filter element saturation occurs, depression increases and plunger is dragged against its spring action, being held in intermediary position according to the element saturation rate. | |
When plunger is held in the maximum saturation position (plunger completely visible in the indicator device body display), replace filter element | |||
For chassis 693. 023/171/185/186 | |||
2 | After filter element replacement, press release button (2) located in the maintenance indicator device end, to release plunger and make it return to the air filter low saturation degree position | ||
Electric maintenance indicator | |||
3 | Replace filter element when maintenance indicator pilot lamp (A) is on indicating its saturation or, after maximum two years | For chassis 693.028/103/171/185/186, 694.000, 695.052 | |
For chassis 384, 386, 388, 660, 682, 695, 696 | |||
For chassis 693.108/128/144/182/184/191/195 | |||
For chassis 693.023/081 | |||
For chassis 693.348/386/396 |