Model | 906.132/134/136 |
with code XB6 (Weight variant 4200 kg) | |
Model | 906.15/25/65 |
with code A50 (Front axle with increased load capacity) | |
except code RH9 (Super-single tyres, 285/65 R16 C) | |
except code ZG1 (Engageable all-wheel drive) | |
except code ZG3 (Engageable all-wheel drive with gear reduction) | |
except code ZU7 (National version for Canada) | |
except code ZU8 (National version for USA) | |
Model | 906.15/65 |
with code A50 (Front axle with increased load capacity) | |
with code RH9 (Super-single tyres, 285/65 R16 C) | |
except code ZG1 (Engageable all-wheel drive) | |
except code ZG3 (Engageable all-wheel drive with gear reduction) | |
except code ZU7 (National version for Canada) | |
except code ZU8 (National version for USA) | |
Model | 906.15/65 |
with code A50 (Front axle with increased load capacity) | |
with code RH9 (Super-single tyres, 285/65 R16 C) | |
with code ZU7 (National version for Canada) | |
except code ZG1 (Engageable all-wheel drive) | |
except code ZG3 (Engageable all-wheel drive with gear reduction) | |
except code ZU8 (National version for USA) | |
Model | 906.15/65 |
with code A50 (Front axle with increased load capacity) | |
with code RH9 (Super-single tyres, 285/65 R16 C) | |
with code ZU8 (National version for USA) | |
except code ZG1 (Engageable all-wheel drive) | |
except code ZG3 (Engageable all-wheel drive with gear reduction) | |
except code ZU7 (National version for Canada) |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||
BE40.20-D-1001-13A | Permissible difference in front axle camber | between left and right sides of vehicle | ° | 0°20' |
For adjustment | ° | 0°10' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1002-13A | Camber with front-axle load of 2000 kg | or for transverse control arm angle | ° | 6,6 | ||
Permissible camber value | Min. | ° | 0°-35' | |||
max. | ° | 0°5' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-25' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-35' | |||
For significant wear on outside shoulder of tire | ° | 0°-35' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1003-13A | Camber with front-axle load of 1950 kg | or for transverse control arm angle | ° | 7,1 | ||
Permissible camber value | Min. | ° | 0°-28' | |||
max. | ° | 0°12' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-18' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-28' | |||
For significant wear on outside shoulder of tire | ° | 0°-28' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1004-13A | Camber with front-axle load of 1900 kg | or for transverse control arm angle | ° | 7,7 | ||
Permissible camber value | Min. | ° | 0°-22' | |||
max. | ° | 0°18' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-12' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-22' | |||
For significant wear on outside shoulder of tire | ° | 0°-22' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1005-13A | Camber with front-axle load of 1850 kg | or for transverse control arm angle | ° | 8,3 | ||
Permissible camber value | Min. | ° | 0°-15' | |||
max. | ° | 0°25' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-5' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-15' | |||
For significant wear on outside shoulder of tire | ° | 0°-15' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1006-13A | Camber with front-axle load of 1800 kg | or for transverse control arm angle | ° | 8,9 | ||
Permissible camber value | Min. | ° | 0°-8' | |||
max. | ° | 0°32' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°2' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-8' | |||
For significant wear on outside shoulder of tire | ° | 0°-8' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1007-13A | Camber with front-axle load of 1750 kg | or for transverse control arm angle | ° | 9,5 | ||
Permissible camber value | Min. | ° | 0°-1' | |||
max. | ° | 0°39' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°9' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-1' | |||
For significant wear on outside shoulder of tire | ° | 0°-1' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1008-13A | Camber with front-axle load of 1700 kg | or for transverse control arm angle | ° | 10 | ||
Permissible camber value | Min. | ° | 0°6' | |||
max. | ° | 0°46' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°16' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°6' | |||
For significant wear on outside shoulder of tire | ° | 0°6' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1009-13A | Camber with front-axle load of 1650 kg | or for transverse control arm angle | ° | 10,6 | ||
Permissible camber value | Min. | ° | 0°14' | |||
max. | ° | 0°54' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°24' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°14' | |||
For significant wear on outside shoulder of tire | ° | 0°14' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1010-13A | Camber with front-axle load of 1600 kg | or for transverse control arm angle | ° | 11,2 | ||
Permissible camber value | Min. | ° | 0°21' | |||
max. | ° | 1°1' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°31' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°21' | |||
For significant wear on outside shoulder of tire | ° | 0°21' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1011-13A | Camber with front-axle load of 1550 kg | or for transverse control arm angle | ° | 11,8 | ||
Permissible camber value | Min. | ° | 0°29' | |||
max. | ° | 1°9' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°39' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°29' | |||
For significant wear on outside shoulder of tire | ° | 0°29' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1012-13A | Camber with front-axle load of 1500 kg | or for transverse control arm angle | ° | 12,4 | ||
Permissible camber value | Min. | ° | 0°37' | |||
max. | ° | 1°17' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°47' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°37' | |||
For significant wear on outside shoulder of tire | ° | 0°37' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1013-13A | Camber with front-axle load of 1450 kg | or for transverse control arm angle | ° | 13 | ||
Permissible camber value | Min. | ° | 0°45' | |||
max. | ° | 1°25' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°55' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°45' | |||
For significant wear on outside shoulder of tire | ° | 0°45' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1014-13A | Camber with front-axle load of 1400 kg | or for transverse control arm angle | ° | 13,5 | ||
Permissible camber value | Min. | ° | 0°53' | |||
max. | ° | 1°33' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 1°3' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°53' | |||
For significant wear on outside shoulder of tire | ° | 0°53' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1015-13A | Camber with front-axle load of 1350 kg | or for transverse control arm angle | ° | 14,1 | ||
Permissible camber value | Min. | ° | 1°1' | |||
max. | ° | 1°41' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 1°11' | ||
Values OK | For wear on outside shoulder of tire | ° | 1°1' | |||
For significant wear on outside shoulder of tire | ° | 1°1' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.132/134/136 with code XB6, model 906.15/25/65 with code A50 except code RH9/ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9 except code ZG1/ZG3/ZU7/ZU8, model 906.15/65 with code A50+RH9+ZU7 except code ZG1/ZG3/ZU8, model 906.15/65 with code A50+RH9+ZU8 except code ZG1/ZG3/ZU7 | ||||
BE40.20-D-1016-13A | Camber with front-axle load of 1300 kg | or for transverse control arm angle | ° | 14,7 | ||
Permissible camber value | Min. | ° | 1°10' | |||
max. | ° | 1°50' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 1°20' | ||
Values OK | For wear on outside shoulder of tire | ° | 1°10' | |||
For significant wear on outside shoulder of tire | ° | 1°10' |
1 | Note down the permissible camber value in the table based on the determined front-axle level. |
2 | Compare the permissible camber value against the actual value from the wheel alignment check. |
Observe permissible difference in front axle camber between right and left sides of the vehicle. |
3 | Determine level of wear on outside shoulder of tire. |
For an actual value within the permissible camber value and with wear on outside shoulder of the tire. |
If the difference between the inner and outer tire tread channel depth is greater than 2 mm, there is a high level of wear on the outside shoulder of the tire. |
4 | Take adjustment value from table and note down. |