S20.20-4527-09
Shown with engine 651 |
1 | Radiator | 6 | Charge air cooler | 11 | Coolant hose | ||
2 | Front end crossmember | 7 | Electrical connection | 12 | Coolant line | ||
3 | Screw/bolt | 8 | Electrical wiring harness | 13 | Bracket | ||
4 | Oil cooler | 9 | Coolant hose | 14 | Lock | ||
5 | Screw/bolt | 10 | Coolant line |
S20.20-4537-08
Shown with ENGINE 274 |
10 | Coolant line | 15 | Air duct segment |
S20.20-4538-09
Shown with ENGINE 274 |
16 | Electrical connection | 18 | Lock | |
17 | Air duct segment |
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Danger ! | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
| Remove/install | ||
1 | Remove air filter housing |
| |
Engine 651 | |||
2 | Drain off coolant | ||
3 | Remove coolant line (10) from retaining clamps on the fan cowl | ||
4 | Remove crossmember | ||
5 | Remove front end crossmember (2) | To do this remove screw/bolts (3) and swivel front end crossmember (2) out of the working area. | |
6 | Remove air duct segments (15) | Engine 651 | |
Installation: Check for correct seating. | |||
7 | Remove screw/bolt (5) | TRANSMISSION 722.9 | |
8 | Remove oil cooler (4) | TRANSMISSION 722.9 | |
To do so, release catch hooks, unhook oil cooler (4) and swivel out of working area. | |||
9 | Disconnect electrical connection (16) | ENGINE 274 | |
10 | Remove air duct segment (17) | ENGINE 274 | |
To do so, release the locks (18). | |||
Installation: Make sure air duct segment (17) is correctly seated in guides (arrows). | |||
11 | Unfasten condenser and swivel out of the working area |
| |
The condenser is not completely removed. Do not suction off refrigerant. | |||
12 | Remove charge air hoses from charge air cooler (6) | ||
13 | Disconnect electrical connection (7) | ||
14 | Remove electrical wiring harness (8) from the fan cowl | ||
15 | Remove coolant hoses (9, 11) from radiator | ||
16 | Remove coolant lines (10, 12) at radiator | ||
17 | Remove locks (14) | ||
18 | Remove bracket (13) | To do this turn bracket (13) through 90° and remove upwards. | |
19 | Remove coolant lines (10, 12) from fan cowl | ||
20 | Remove radiator (1) | Lift out radiator (1) together with charge air cooler (6) upwards. | |
21 | Modify existing detachable parts | Only when replacing the radiator (1). | |
22 | Install in the reverse order | ||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
23 | Check engine cooling system for leaktightness |
Viitatut asiakirjat
- ar0910s1150e
- ar0910s1150eg
- ar0941d131101we
- ar2000s1010e
- ar2000s1140e
- ar2020s386509s
- ar2020s386509s
- ar6230s1360e
- ar8330s6540e
- as0000z000501a Onnettomuusvaara: Varo moottorin käydessä, ettei auto lähde liikkeelle. Loukkaantumisvaara: Varo liikkuvia ja kuumia osia moottorin käydessä ja moottoria käynnistettäessä
- as0000z001001a Hengenvaara: Auto saattaa pudota tai kipata nosturilta
- as2000z000101a Loukkaantumisvaara: Kuuma jäähdytysneste voi aiheuttaa palovammoja. Myrkytysvaara: Jäähdytysneste on vaarallista nieltynä.