Engine | 904 in model 368.112/115/117/185/187 |
Engine | 906 in model 368.054/154 |
Engine | 906.977 in model 382.175 |
Engine | 924 in model 368.002/006/052/054/115/117, 685.282/284/289/290 |
Engine | 924.913 in model 368.104/106 |
Engine | 924.995 in model 368.004 |
Engine | 924.996 in model 368.004 |
Engine | 926 in model 368.150/154, 382.171/176/177/178/180/181/185/188/189 |
B20.20-0020-08
1 | Coolant pipe (inlet) | 5 | Coolant pipe (return) | 8 | Electric connection | ||
2 | Support | 6 | Hose | 9 | Constant throttle solenoid valve | ||
3 | Bolt | 7 | Bolt | 10 | Fuel tubes | ||
4 | Clamp |
| Remove/install | ||
1 | Turn off ignition | ||
2 | Open the inspection cover on the engine hood | The inspection cover can carry according to the body version. | |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
3 | Drain the coolant | ||
Topical note | Notes on coolant | ||
| |||
Drain the coolant by loosening the clamp of the coolant hose on the automatic transmission oil cooler | |||
4 | Slacken the clamps (4) at the ends of the cooling piping | ||
5 | Loosen the bolts (3) at the end of the of the cooling piping (1, 5) | ||
6 | Remove the bracket (2) | Remove the bracket (2) only if it is necessary to remove the compressor, otherwise, continue from the work step 9. | |
7 | Disconnect the electric connection (8) of the constant throttle solenoid valve (9) | ||
8 | Loosen the fastening bolt (3) of the fuel pipings (10) | It is not necessary to remove the fuel pipings (10). | |
9 | Loosen the hose (6) and remove up the cooling pipings (1,5) | Identify the coolant pipe assembly position (1). | |
Installation: Observe the assembly position identification. | |||
10 | Install in reverse order | ||
| Check | ||
11 | Check the leak tightness of coolant pipe assemblies (1,5) | Visual inspection. |
Viitatut asiakirjat
- ah2000n208001a Jäähdytysnestettä koskevia huomautuksia
- ap2000b208001b
- as2000z000101a Loukkaantumisvaara: Kuuma jäähdytysneste voi aiheuttaa palovammoja. Myrkytysvaara: Jäähdytysneste on vaarallista nieltynä.