Convenience opening/closing with soft top control button function

P80.45-2034-09

1 Circuit status

2 Trunk lid open/closed

3 Actuation request

4 Open/close adjustment request

5 Window actuation

6 Power window motor blockage detection

7 Soft top actuation

N52 Soft top mechanism control unit

N69/1 Door control module left

N69/2 Door control module right

N73 EIS [EZS] control unit

S84/10 Soft top control button

S88/4 Pawl rotary tumbler switch

CAN B Interior CAN

A7/5 Soft top mechanism hydraulic unit

M10/3 Left front power window motor

M10/4 Right front power window motor

M10/5 Left rear power window motor

M10/6 Right rear power window motor

N10/2 Rear SAM control unit with fuse and relay module

Function requirements

When power window is actuated

 Circuit 15 ON

 No overvoltage or undervoltage

When soft top is actuated additionally

 No faults at outputs for actuating soft top actuators and power windows

 The temperature of the soft top actuation hydraulic unit (A7/5) is in a valid range.

 Roll bar actuation not activated

 Trunk lid closed

 Trunk partition closed

 Trunk partition for ski bag closed
(with code (282a) Ski bag (through-loading feature))

-----------------------------------------------------------------------------------------

The convenience closing/opening function is performed even if the windows are not synchronized.

Abort

The convenience closing/opening function is interrupted, if the function requirements mentioned above are no longer fulfilled.

-----------------------------------------------------------------------------------------

Convenience opening/closing function (vehicles up to model year 08 /YoM 07) with soft top control button (S84/10)

If the soft top control button (S84/10) in the center console is actuated twice within t < 0.5 s and held down, all four side windows close or open.

If the soft top control button (S84/10) is actuated only once and held down, all side windows close or open and then the soft top.

The actuation request is transmitted by the soft top control button (S84/10) to the soft top mechanism control unit

-----------------------------------------------------------------------------------------

(N52) and relayed via the interior CAN (CAN B) to the left door control unit (N69/1) as well as right door control unit (N69/2).

The left front power window motor (M10/3) is actuated by the left door control unit (N69/1), the right front power window motor (M10/4) by the right door control unit (N69/2).

The left rear power window motor (M10/5) and right rear power window motor (M10/6) as well as the soft top mechanism hydraulic unit (A7/5) are actuated directly by the soft top mechanism control unit (N52).

-----------------------------------------------------------------------------------------

Convenience closing/opening function (vehicles as of model year 09 /YoM 08 with code (494) USA version or code (460) Canada version) with soft top control button (S84/10)

If the soft top control button (S84/10) in the center console is actuated twice within t < 0.5 s and held down, all four side windows open.

If the soft top control button (S84/10) is actuated only once and held down, all side windows open and then the soft top opens and closes. The side windows must be closed manually via the driver-side power window switch group (S20/1) or passenger-side power window switch (S21/2).

The actuation request is transmitted by the soft top control button (S84/10) to the soft top mechanism control unit (N52) and is relayed via the interior CAN (CAN B) to the left door control unit (N69/1) as well as right door control unit (N69/2).

The left front power window motor (M10/3) is actuated by the left door control unit (N69/1), the right front power window motor (M10/4) by the right door control unit (N69/2).

The left rear power window motor (M10/5) and right rear power window motor (M10/6) as well as the soft top mechanism hydraulic unit (A7/5) are actuated directly by the soft top mechanism control unit (N52).