P07.61-3356-12
B2/5 Hot film mass air flow sensor
B6/1 Camshaft Hall sensor
B11/4 Coolant temperature sensor
B37 Accelerator pedal sensor
L8 Crankshaft rpm sensor
N3/10 Motor electronics control unit
M16/6 Throttle valve actuator
Y62/1 Cylinder 1 fuel injection valve
Y62/2 Cylinder 2 fuel injection valve
Y62/3 Cylinder 3 fuel injection valve
Y62/4 Cylinder 4 fuel injection valve
Function
The braking effect of the engine in the overrun mode is increased and the fuel consumption is reduced by means of the deceleration fuel shutoff.
In overrun mode, the ME control unit switches off the fuel injection valves in line with the coolant temperature and speed, provided that he accelerator pedal is not operated (detected on the basis of an actual value signal from the accelerator pedal sensor).
The fuel injectors are operated again,
when the accelerator pedal is depressed or when idle speed is reached, and no further overrun mode exists.
Hot film mass air flow sensor, component description | B2/5 | ||
Camshaft Hall sensor, component description | B6/1 | ||
Coolant temperature sensor, component description | B11/4 | ||
Accelerator pedal sensor, component description | B37 | ||
Crankshaft position sensor, component description | L8 | ||
Throttle valve actuator, component description | M16/6 | ||
ME-SFI [ME] control unit, component description | N3/10 | ||
Fuel injection valves, component description | Y62/1, Y62/2, Y62/3 and Y62/4 |
Referenced documents
- gf0703p6010ff Fuel injection valves, component description
- gf0704p6010ff Crankshaft position sensor, component description
- gf0704p6020ff Camshaft Hall sensor, component description
- gf0704p6040ff Coolant temperature sensor, component description
- gf0707p6000ff Hot film mass air flow sensor, component description
- gf0761p6000ff ME-SFI [ME] control unit, component description
- gf3020p2010ff Accelerator pedal sensor, component description
- gf3020p2020ff Throttle valve actuator, component description