Shown on left front door |
1 | Seal |
S72.10-4568-01
| Remove/install | ||
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
1 | Remove door liner on front door | ||
Window opens completely as the switches of the power windows can no longer be activated later on. | |||
2 | Remove outer sealing rail | ||
3 | Remove inner sealing rail from window cutout | Long wedge | |
4 | Remove sealing (1) | Installation: Slightly moisten seal (1) with liquid lubricant. | |
Lubricant, rubber assembly 1 l | |||
5 | Install in the reverse order |
115 589 03 59 00
Long wedge
Referenced documents
- ah0000z030001a General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment
- ah6800n000101s Notes on carrying out repair work in the vehicle interior
- ar7210s1700s Remove/install sealing rail on outside
- ar7210s6575s Remove/install front door panel
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.
- as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)