Remove/install front paneling on kitchen floor cabinet unit

AR68.30-S-2286S

Remove/install front paneling on kitchen floor cabinet unit

18.11.2019

Model

639.813

with code ZK7 (Equipment line MARCO POLO)

Modification notes

12.11.2007

Sequence of operation steps revised

Operation steps 1 to 4

1

Front drawer

5

Bolts

2

Bolts

6

Rubber channel

3

Trash can

7

Cover

4

Rail

8

Bolts

9

Electrical connector for charger

10

Exterior socket for electrical connector

11

Screw

 

Remove/install

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

1

Remove the trash can (3)

2

Remove the trim on the left B-pillar

AR68.30-S-4700S

3

Remove the front drawer (1)

AR86.60-S-0020S

4

Remove screw/bolts (2)

5

Remove the rail (4)

 To do so, remove the rubber profile (6) if necessary and unscrew the screws (5).

 Installation: Ensure that the rubber profile (6) is seated correctly.

6

Remove screws/bolts (8)

7

Remove the trim (7) starting on the B-pillar


Unclip the trim (7) on the B-pillar and, on the kitchen cupboard, carefully pull it toward the center of the vehicle from the retaining clamp
in order to prevent damage.

 Installation:
Position the trim (7) correctly
in order to prevent damage.

 Long wedge

*115589035900

8

Disconnect the electrical connector for the charger (9)

 Installation: Stick the new foam insulation around the electrical connector for the charger (9).

9

Disconnect the exterior socket for the electrical connector (10)

 Installation: Stick the new foam insulation around the electrical connector for the exterior socket (10).

10

Remove screw (11)

 Screw/bolt, ground point to side wall

*BA86.60-N-1002-01A

11

Remove trim (7)

12

Transfer the detachable parts of the trim (7)

AR68.30-S-2286-01S

 Only when replacing the trim (7).

13

Install in reverse order



Check

14

Check electric loads for proper function

 Kitchenette

Number

Designation

Model 639.813
with code ZK7 (Equipment line MARCO POLO)

BA86.60-N-1002-01A

Screw/bolt, ground point to side wall

Nm

16