Remove/install paneling on B-pillar

AR68.30-S-4700S

Remove/install paneling on B-pillar

06.12.2019

Model

636, 639

Shown on model 639.8 on left side of vehicle

1

Upper B-pillar paneling

2

Lower B-pillar paneling

 

Remove/install

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

1

Remove load protection grille

Only for model 639.60/70 with code DW3 (load protection grille without passage, removable)

AR68.74-S-7491S

Only for model 639.60/70 with code DW6 (load protection grille one-piece, driver-side) when removing the upper left paneling on B-pillar (1) and/or the lower left paneling an B-pillar (2).

AR68.74-S-7491SA

Only for model 639.60/70 with code D67 (load protection grille with passage)

AR68.74-S-7491SB

 Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

2

Remove upper B-pillar paneling (1)

AR68.30-S-4700-01S

 Installation: Check clips, replace if necessary.

 Bolt, seat belt guide bracket to seat belt height adjustment

*BA91.40-N-1002-03A

 Long wedge

*115589035900

3

Remove paneling from cross strut behind seat bench

Only for model 639.6/70 with code S23 (front passenger bench seat), with code SH4 (front passenger double bench seat, comfort)

AR68.30-S-1404S

4

Remove lower B-pillar paneling (2)

AR68.30-S-4700-02S

 Installation: Check clips, replace if necessary.

 Bolt, anchoring lug to B-pillar

*BA68.00-N-1003-01A

 Bolt for belt end fitting on B-pillar

*BA91.40-N-1004-03A

 Long wedge

*115589035900

5

Install in the reverse order



Check

6

Carry out a function check of the seat belt

 Check belt height activation and seat belt for proper function and easy motion

 Interior equipment - General

Number

Designation

Model 636

MODEL 639.601/ 603/605/701/703/ 705/711/713

BA68.00-N-1003-01A

Bolt, anchoring lug to B-pillar

Nm

18

18

 Interior equipment - General

Number

Designation

MODEL 639.811 / 813/815

BA68.00-N-1003-01A

Bolt, anchoring lug to B-pillar

Nm

18

 Seat belts/emergency tensioning retractors, front seats

Number

Designation

MODEL 636, MODEL 639 except CODE S23 except CODE SH4

Model 639 with code S23, SH4

BA91.40-N-1002-03A

Bolt, seat belt guide bracket to seat belt height adjustment

Nm

30

30

 Seat belts/emergency tensioning retractors, front seats

Number

Designation

MODEL 636, MODEL 639 except CODE S23 except CODE SH4

Model 639 with code S23, SH4

BA91.40-N-1004-03A

Bolt for belt end fitting on B-pillar

Nm

40

40