ar6830p4700ak

Remove/install paneling on B-pillar

Type ar · topic 68.30 · version 0102 · 2007-03-19

Applies to: MODEL 169.0, 245.2 Paneling on lower B-pillar

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 169 (models 0**) · Series 245 (models 2**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 169 (models 0**) · Series 245 (models 2**)

AR68.30-P-4700AK

Remove/install paneling on B-pillar

7.3.07

MODEL 169.0, 245.2
Paneling on lower B-pillar

Remove/install paneling on B-pillar

P68.30-2993-06

Shown on right bottom B-pillar paneling

1 Bottom B-pillar paneling

2 Edge guard

3 Edge guard

4 Bolt

5 Belt end fitting

6 Upper B-pillar paneling

7 Guides

Remove/install

1

Remove left or right front door sill molding

AR68.30-P-4100AK

2.1

Remove left or right door sill molding from rear door

Not on model 169.3

AR68.30-P-4100AL

3

Move front seat and backrest toward front

4

Loosen edge guard (2) from front door and edge guard from rear door (3) in lower area of B-pillar

Installation: Ensure that edge guard (2) on front door and edge guard (3) on rear door is seated correctly.

5

Unscrew bolt (4) and remove belt end fitting (5)

*BA91.40-P-1001-01K

6

Pull bottom B-pillar paneling (1) toward outside to side in upper area and tilt toward inside.

Installation: Ensure that bottom B-pillar paneling (1) is seated correctly on upper B-pillar paneling (6).

7

Remove bottom B-pillar paneling (1) upward from recesses (arrows) in B-pillar

Installation: Insert guides (7) on bottom B-pillar paneling (1) into recesses (arrows) in B-pillar.

8

Install in the reverse order

Seat belts/emergency tensioning retractors

Number

Designation

Model
169, 245

BA91.40-P-1001-01K

Bolt/nut on belt end fitting

Nm

32

Referenced documents