ar6830p4100ak

Remove/install door sill molding

Type ar · topic 68.30 · version 0101 · 2005-04-13

Applies to: Model 169.0 /3, 245.2 Front door sill molding

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 169 (models 0**, 3**) · Series 245 (models 2**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.37 Footwell trim — Series 169 (models 0**, 3**) · Series 245 (models 2**)

AR68.30-P-4100AK

Remove/install door sill molding

9.3.04

Model 169.0 /3, 245.2
Front door sill molding

Remove/install door sill molding

P68.30-2999-08

Shown on model 169.0

1 Door sill molding

2 Footwell paneling

3 Expansion clip

6 Bottom B-pillar paneling or side rear paneling

4 Clamp

5 Pin

Remove/install

1

Completely open left or right front door

2

Loosen door sill molding (1) from foot well paneling (2) with mounting wedge

Installation: Replace damaged expansion clips (3)

*110589035900

3

Press door sill molding (1) out of clips (4) with mounting wedge

Unclip door sill molding (1) from front toward rear.

*110589035900

Installation: Ensure that door sill molding (1) is seated correctly in clips (4).

4

Remove door sill molding (1) toward front.

Installation: Slide pin (5) on door sill molding (1) below bottom B-pillar paneling or side rear paneling (6).

5

Install in the reverse order

Remove/install door sill molding

Mounting wedge

110 589 03 59 00