ar6320l200003vb

Install D-pillar

Type ar · topic 63.20 · version 0102 · 2006-07-25

Applies to: MODEL 414.700

Where it sits

Function group 3 Body › 63 Side wall › 63.20 Pillars — Series 414 (models 700)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.45 column — Series 414 (models 700)

AR63.20-L-2000-03VB

Install D-pillar

Measures for preventing damage to vehicles or components when performing arc welding work

All models

AH00.00-N-0005-01A

Commercially available tools

Number

Designation

WH58.30-Z-1003-01A

Electrode miller

WH58.30-Z-1003-02A

Clamping pliers

WH58.30-Z-1031-02A

C-clamp

WH58.30-Z-1038-02A

Manual temporary fastener, dia.6.4 mm - clamping range 0 -15 mm, identification color silver

Firma Hausmann GmbH D-34346 Hann. Münden, Germany

WH58.30-Z-1001-29A

Lever riveting device

WH58.30-Z-1001-40A

Tarp (fire-resistant)

Workshop equipment

WE58.40-Z-1010-01A

Celette straightening bracket set 7168.300 (model 168, model 414)

WE58.40-Z-1011-01A

Car-Bench straightening bracket set 82 423 (model 168, model 414)

WE58.40-Z-1035-01A

Celette 7168.309 supplementary straightening set for Celette straightening bracket set 7168.300 (model 168.1 long wheelbase)

WE58.40-Z-1036-01A

Car-Bench 82436 supplementary straightening set for Car Bench straightening bracket set 82 423 (model 168.1 long wheelbase)

WE58.40-Z-1040-01A

Celette 7414.309 supplementary straightening set for Celette straightening bracket set 7168.300 (model 414)

WE58.40-Z-1043-01A

Celette straightening set 7414.300 (model 414)

WE58.40-Z-1044-01A

Car-Bench 82444 supplementary straightening set for Car Bench straightening bracket set 82 423 (model 414)

WE58.40-Z-1001-01E

Celette straightening bench

WE58.40-Z-1002-01E

Celette straightening unit

WE58.40-Z-1003-01E

Car-Bench straightening bench

WE58.40-Z-1004-01E

Car-Bench straightening lifting platform

WE58.40-Z-1005-01E

Car-Bench straightening equipment

WE58.40-Z-1007-01E

Celette module crossmember set 955.940

WE58.40-Z-1008-01E

Celette additional member 955.908

WE58.40-Z-1011-01E

Car-Bench Universal crossmember set A 296/15 (all crossmembers 1500 mm long)

WE58.40-Z-1001-02A

Inert gas welder

WE58.40-Z-1002-02A

Spot welder

WE58.40-Z-1005-03A

Wet/dry vacuum cleaner

WE58.40-Z-1001-05A

Two-post lifting platform

Install D-pillar

L63.20-0299-06

1 Install bottom D-pillar and top D-pillar together with corner paneling, adapt and fasten to straightening element.

2 Fasten D-pillar with clamps and pop rivets with locking thread.

3 Drill and deburr holes in areas A to D.

4 Rivet D-pillar in areas A to D (use Polygrip aluminum/steel flat head rivets Ø 6.414 mm).

Install D-pillar

L63.20-0306-09

5 D-pillar in marked areas (points) .

6 D-pillar in areas E to J .

Install D-pillar

L63.20-0310-07

7 D-pillar in area K .

8 D-pillar in areas L and M .

9 Clean all welds with wire brush.

For reasons of strength and cost, do not grind down all welds in the area which is not visible.

Referenced documents