1 | Oil reservoir |
2 | Oil level dipstick |
Seta | "Max" mark |
W46.25-1104-11
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Warning | Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid. | Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses. | |
Danger | Risk of death caused by vehicle slipping or toppling off during lifting | Only lift vehicle at the lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury from being trapped in the swivel range of steered axles | Ensure that no persons or objects are in the swivel range of all steered axles when turning the steering wheel. Do not stand in the swivel range of the additional steering axle when the engine is running.. | |
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
Topical note | Notes on maintenance and repair work | . | |
Topical note | Notes on tilting the cab | . | |
Refill | |||
1 | Start ignition | So that the engine can be ventilated with the cab tilted, start the engine or stop it again by means of the engine start/stop button (S10.1) | |
2 | Position the front wheels in the straight-ahead position | ||
3 | Open the maintenance cover | Only for vehicles 695.023/53 and 958.0/1 | |
4 | Tilt the cab | Keep the ignition on. | |
Only for vehicles 695.023/53 and 958.0/1 | |||
5 | Supply the oil tank (1) with steering gear oil up to the max mark (arrow) in the oil level dipstick (2) | Steering gear oil | |
Bleed | |||
6 | Chock the vehicle to prevent accidentally moving | ||
7 | Lift the vehicle by the front axle until the wheels can be freely rotated and support the vehicle on adequate stands | ||
8 | Start the engine by means of the engine start/stop button (S10.1) and let it run at idle speed until air bubbles are no longer present in the oil tank (1) | Steering gear oil | |
Meanwhile, observe the steering gear oil level in the oil tank (1) | |||
| |||
If necessary, replenish with steering gear oil. | |||
Steering gear oil level in the oil tank (1) should not be below the "min." mark | |||
| |||
otherwise, the air will be aspirated. | |||
9 | Stop the engine by means of the engine start/stop button (S10.1) | ||
10 | Check the steering gear oil level in the oil tank (1) and correct if necessary | Steering gear oil | |
11 | Close the oil tank (1) | ||
12 | Return the cab back to the work position | Only for vehicles 695.023/53 and 958.0/1 | |
13 | Start the engine and let it run at idle speed | ||
14 | Turn the steering wheel several times to the left and to the right until the mechanical stop | ||
15 | Position the front wheels in the straight-ahead position | ||
16 | Stop the engine | ||
17 | Start ignition | ||
18 | Tilt the cab | Only for vehicles 695.023/53 and 958.0/1 | |
19 | Check the steering gear oil level in the oil tank (1) and correct if necessary | Steering gear oil | |
20 | Start the engine by means of the engine start/stop button (S10.1)and let it run at idle speed | Observe the steering gear oil level in the oil tank (1). | |
21 | Stop the engine by means of the engine start/stop button (S10.1) | After stopping the engine, the steering gear oil level in the oil tank (1) should rise at most 2 cm | |
If steering gear oil level in the oil tank (1) exceeds 2 cm, | |||
| |||
it means the presence of air in the system, and the bleed process must be repeated. | |||
22 | Lift the front axle, remove the supporting stands, and lower the vehicle | ||
23 | Supply the oil tank (1) with steering gear oil up to the max mark (arrow) in the oil level dipstick (2) | Steering gear oil | |
24 | Close the oil tank (1) | ||
25 | Return the cab back to the work position | Only for vehicle 695.023/53 and 958.0/1 | |
26 | Close the maintenance cover | Only for vehicles 695.023/53 and 958.0/1 |
Steering gear oil |
Number | Designation | Steering gear 766.487/488/584/586 in model 368.0/1 | Steering gear 766.496/498/511 in model 958.0/1 | ||
BF46.00-B-1001-01A | Steering gear oil | Filling volume | litros | 8,5 | 3,3 |
Oil class | Consultar documento AH00.40-B-0001-01MBB e MB 236.2 no site Mercedes-Benz / Guia de Lubrificantes | Consultar documento AH00.40-B-0001-01MBB e MB 236.2 no site Mercedes-Benz / Guia de Lubrificantes |
Steering gear oil |
Number | Designation | Steering gear 766.488/561/562/564/583/584 in model 384.0/223 | ||
BF46.00-B-1001-01A | Steering gear oil | Filling volume | litros | 3,5 |
Oil class | Consultar documento AH00.40-B-0001-01MBB e MB 236.2 no site Mercedes-Benz / Guia de Lubrificantes |
Referenced documents
- ah4620n000101h Notes on maintenance and repair work
- ah6080n000301a Notes on tilting the cab
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as0000z001301a Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid.
- as0000z003201a Risk of death caused by vehicle slipping or toppling off during lifting
- as4600z000201a Risk of injury from being trapped in the swivel range of steered axles
- as6080z000101a Risk of injury caused by body parts being pinched or crushed as cab is tilted