ar4610d0300f

Remove/install steering angle sensor

Type ar · topic 46.10 · version 0100 · 2013-06-17

Applies to: MODEL 909

Where it sits

Function group 2 Chassis › 46 Steering › 46.10 Steering wheel, jacket tube, steering shaft, steering lock — Series 909

EinPAS 22 Steering › 22.15 Power steering › 22.15.12 Sensor/switch/wiring harness — Series 909

EinPAS 26 Active safety system › 26.20 Braking/traction control › 26.20.12 Sensor/switch/wiring harness — Series 909

AR46.10-D-0300F

Remove/install steering angle sensor

28.05.2013

MODEL

909

Remove/install steering angle sensor

1

Fuse cover

2

Steering column trim (bottom)

3

Steering column trim (top)

4

Clock spring contact

5

Electrical connector

6

Steering angle sensor

D46.10-1147-11

Remove/install

Danger !

Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries

No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Detach ground line from battery and remove transmitter key

Notes on battery

AH54.10-P-0001-01A

2

Remove steering wheel

AR46.10-D-0100FA

3

Remove fuse cover (1)

4

Remove steering column trim (2, 3)

Installation: Note installation of lines under the steering column trim (2, 3).

5

Remove clock spring contact (4)

AR46.10-D-0200F

6

Detach electrical connection (5) from steering angle sensor (6)

7

Remove steering angle sensor (6)

Installation: Note installation position of steering angle sensor (6) (plug-in connection at bottom, see enlarged detail).
Catch hook of steering angle sensor (6) must engage in steering-wheel groove.

8

Install in the reverse order

9

Set time on instrument cluster

10

Set time on timer for auxiliary heater

MODEL 909
with CODE H12 (Auxiliary heater (warm water))
MODEL 909
with CODE H86 (Chronometer with relay for independent heating)
MODEL 909
with CODE HZ5 (10 kW warm water auxiliary heater with timer)

Referenced documents