AR40.30-P-0400A | Check accidents vehicles and vehicles in which accident damage is suspected | 15.2.95 |
MODEL 129, 140, 163, 170, 202, 208, 210, 215, 220
| Inspect | ||
1 | Perform chassis alignment check | The distance and comparison measurements are to be carried out if the chassis alignment check does not allow any clear diagnosis to be made. | |
Model Series 129, 140, 170, 202, 208, 210 | |||
Models 215, 220 except 220.875/878 and 220.175/178 with Code (979) Special protection version with Code (Z07) Maximum protection | |||
models 220.175/178 with Code (979) Special protection version with Code (Z07) Maximum protection | |||
Model 220.875/ 878 | |||
2 | Preparations for distance and comparison measurements | ||
Models 129, 140 | |||
Model 170, 202, 208, 210 | |||
Models 215, 220 | |||
3 | Carry out distance and comparison measurements on front and rear axles | Model 129, 170, 202, 208 | |
Model 140 | |||
Model 210 | |||
Model 163 | |||
Models 215, 220 | |||
These measurements determine if the chassis parts have to be replaced or if the body must be maintained on the straightening bench. Either the difference between the left and right or the distance measurement can be used | |||
If the distance and comparison measurements do not permit any clear diagnosis of the axle parts, measure | |||
Models 215, 220: In the event of visible damage, e.g. cracking, deformation at front axle carrier or rear axle carrier, these parts should be replaced. | |||
4 | Measuring rear axle carrier | ||
Model 129, 170, 202, 208, 210 | |||
Model 140 | |||
Models 215, 220 | |||
5 | Measuring spring link, camber arm, radius rod, thrust arm and track rod of rear axle | ||
Model 129, 170, 202, 208, 210 | |||
Model 140 | |||
Models 215, 220 | |||
6 | Measuring wheel carrier (when removed) | ||
Model 129, 170, 202, 208, 210 | |||
Model 140 | |||
Models 215, 220 | |||
7 | Measure front axle carrier (when removed) | ||
Model 140 | |||
Model 210 | |||
Model 215, model 220 without 4MATIC | |||
8 | Measure steering knuckle (when removed) | ||
Model 129 | |||
Model 140 | |||
Models170,202,208,210.00/01/02/ | |||
Model 210.08 /28 | |||
Model 215, model 220 without 4MATIC | |||
9 | Measure lower wishbone (when removed) | ||
Models 129, 140 |
Referenced documents
- ar4020p0200a Perform chassis alignment check
- ar4020p0200i
- ar4020p0200i Perform wheel alignment check
- ar4020p0200mb Perform wheel alignment check
- ar4020p0200mb
- ar4020p0200mp Perform wheel alignment check
- ar4030p0401a Preparations for dimensional and comparative measurement
- ar4030p0401b Preparations for distance and comparison measurements
- ar4030p0401i Preparations for distance and comparison measurements
- ar4030p0402a Carry out distance and comparison measurements on front and rear axles
- ar4030p0402b Performing dimensional and comparative measurement at front and rear axle
- ar4030p0402c Carry out distance and comparison measurements on front and rear axles
- ar4030p0402gh Carrying out distance and comparison measurements on front and rear axles
- ar4030p0402i Carry out distance and comparison measurements on front and rear axles
- ar4030p0410a Measuring rear axle carrier (when removed)
- ar4030p0410b Checking alignment of rear axle carrier (removed)
- ar4030p0410i Checking alignment of rear axle carrier (removed)
- ar4030p0420a Checking alignment of spring control arm, camber strut, strut rod, thrust arm and tie rod on rear axle
- ar4030p0420b Checking alignment of spring link, camber strut, radius rod, thrust arm and track rod on rear axle
- ar4030p0420i Checking alignment of spring link, camber strut, tension arm, torque strut and track rod on rear axle
- ar4030p0425a Measuring wheel carrier (when removed)
- ar4030p0425b Measuring wheel carrier (when removed)
- ar4030p0425i Checking alignment of wheel carrier (removed)
- ar4030p0450a Measuring front wheel carrier (when removed)
- ar4030p0450b Measuring front axle carrier (removed)
- ar4030p0450i Measure front axle carrier (when removed)
- ar4030p0451a Measuring steering knuckle
- ar4030p0451b Checking alignment of steering knuckle (removed)
- ar4030p0451c Measuring steering knuckle (removed)
- ar4030p0451d Checking alignment of steering knuckle (removed)
- ar4030p0451i Measuring steering knuckle (removed)
- ar4030p0452a Measuring lower wishbone (when removed)