P15.10-2157-07
1 Front engine cover
2 Intake air duct
3 Bolt
B6/6 Left exhaust camshaft Hall sensor
B6/7 Right exhaust camshaft Hall sensor
B6/4 Left intake camshaft Hall sensor
B6/5 Right intake camshaft Hall sensor
| Remove/install | ||
1 | Pull front engine cover (1) up and out of the mounts. | ||
2 | Remove left or right intake air duct (2) | ||
3 | Remove power steering expansion reservoir | Engine 273 in model 211 | |
Engine 273 in model 219 | |||
4 | Disconnect plug from respective exhaust camshaft Hall sensor | ||
5 | Unscrew bolt (3) and pull respective camshaft Hall sensor out of front cover on cylinder head | | |
| |||
6 | Install in the reverse order | ||
7 | Read out fault memory | STAR DIAGNOSIS diagnosis system | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine | Secure vehicle to prevent it from moving by itself. | |
8 | Run engine and inspect for oil leaks |
Position sensor
Number | Designation | Engine | Engine | ||
BA15.10-P-1002-03E | Bolt connecting camshaft Hall sensor to front cover on cylinder head | Nm | 8 | 8 | |
External Torx set
001 589 76 09 00
Commercially available tools
Referenced documents
- ad0000p200004a Connect STAR DIAGNOSIS and read out fault memory
- ad0000p200004a
- ar4625p1000ts Remove/install expansion reservoir
- ar4625p1000tx Remove/install expansion reservoir
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.