Shown on model 415 with engine 200 with code MB5 (Low-pollutant vehicle Euro 5 Gr. I) |
1 | Vacuum unit |
2 | Hose |
3 | Electrical connection |
4 | Engine air intake duct |
Y31/4 | Boost pressure control pressure transducer |
S07.17-4506-11
| Remove/install | ||
1 | Remove vacuum unit (1) | ||
2 | Remove hoses (2) | Installation: Check clamps; replace as per findings. | |
3 | Disconnect electrical connection (3) | ||
4 | Remove boost pressure control pressure transducer (Y31/4) | To do this pull out boost pressure control pressure transducer (Y31/4) in the direction of the arrow out of the engine air intake duct (4). | |
5 | Install in the reverse order | ||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
6 | Check for leaktightness with engine running | Visual inspection only. |
Referenced documents
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.