Remove/install oil dipstick guide tube · ar0145p9600cd · Mercedes-Benz WIS

AR01.45-P-9600CD

Remove/install oil dipstick guide tube

30.10.15

Engine

651 in model 166, 172, 204, 207, 212 (except 212.098/298), 218

P18.40-2325-09

Shown on MODEL 204

1	Screw/bolt		3	Oil dipstick guide tube
2	Screw/bolt		4	O-ring

 	Remove/install
 Danger !	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
 Danger !	Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.	No parts of the body or limbs should be within the operating range of the mechanism when moving components.	AS00.00-Z-0009-01A
1	Remove cylinder head cover trim
2	Remove air filter housing		AR09.10-P-1150CD
3	Loosen oil dipstick guide tube for AT on engine	Engine 651 in model 204, 207, 212 (except 212.098/298) with transmission 722.6
4	Remove screw/bolt (1)	 Bolt for oil dipstick guide tube fastening	*BA18.40-P-1002-01O
5	Secure vehicle on vehicle lift	Engine 651 in model 166	AR00.60-P-0100GZ
		Engine 651 in model 172	AR00.60-P-0100T
		Engine 651 in model 204, 207	AR00.60-P-0100CW
		Engine 651 in model 212 (except 212.098/298), 218	AR00.60-P-0100EWS
6.1	Remove center underfloor covering	Engine 651 in model 166
		Engine 651 in model 166	AR61.30-P-1001GQ
6.2	Remove bottom sections of soundproofing	Engine 651 in model 172, 204 (except 204.9), 207, 212 (except 212.098/298), 218
		Engine 651 in model 172	AR94.30-P-5300W
		Engine 651 in model 204 (except 204.9), 207, 212 (except 212.098/298), 218	AR94.30-P-5300EW
6.3	Remove lower engine compartment paneling	Engine 651 in model 204.9
		Engine 651 in model 204.9	AR61.20-P-1105CY
7	Remove screw/bolt (2)	 Bolt for oil dipstick guide tube fastening	*BA18.40-P-1002-01O
8	Pull oil dipstick guide tube (3) out of engine oil pan	 Installation: Replace O-ring (4).
9	Install in the reverse order
 Danger !	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
10	Check engine in the area around the oil dipstick guide tube (3) for leaktightness with the engine running

 Oil level sensor, oil pressure sensor

Number	Designation		Engine 651
BA18.40-P-1002-01O	Bolt for oil dipstick guide tube fastening	Nm	9

Referenced documents

ar0060p0100cw Secure vehicle on vehicle lift
ar0060p0100ews Secure vehicle on vehicle lift
ar0060p0100gz Secure vehicle on vehicle lift
ar0060p0100t Secure vehicle on vehicle lift
ar0910p1150cd Remove/install air filter housing
ar6120p1105cy Remove/install bottom engine compartment paneling
ar6130p1001gq Remove/install underbody paneling
ar9430p5300ew Remove/install bottom parts of soundproofing
ar9430p5300w Remove/install bottom parts of soundproofing
as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
as0000z000901a Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.