P01.40-0296-09
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
1 | Remove a spark plug from each cylinder | ||
| Model 129 with engine 112.923 /943, 113.961 | ||
| Model 163 with engine 112, 113 | ||
| Model 209, 210, 208 except 208.474, 202 except 202.088 with engine 112, 113 model 203, 170 with engine 112 | ||
| Model 215, 220 with engine 137 model 215, 220, 230 with engine 275 | ||
| Model 211 with engine 112, 113 Model 215 with engine 113 Model 220 with engine 112, 113 Model 230 with engine 112, 113 | ||
| Model 240 with engine 285 | ||
| Model 463 with engine 112, 113 | ||
2 | Remove lower engine compartment paneling |
| |
3 | Move piston of cylinder to be checked to bottom dead center (BDC) | For this purpose, crank engine at center bolt of crankshaft in direction of engine rotation: | |
| |||
4 | Connect cylinder illumination unit (05) and insert flexible test probe of cylinder illumination unit (05) through spark plug bore into respective cylinder | ||
| Check | ||
5 | Check cylinder barrel | ||
General information on inspecting cylinder walls | |||
Cylinder head must be removed if condition of cylinder barrel cannot be clearly identified. Before removal, the general information on checking the cylinder barrels must be strictly observed: | |||
6 | Check remaining cylinders in an analogue fashion | ||
7 | Install in the reverse order |
Referenced documents
- ah0100p030001va General information on inspecting cylinder walls
- ap1510p1580a Replace spark plugs
- ap1510p1580ab Replace spark plugs
- ap1510p1580ac Replace spark plugs
- ap1510p1580ga Replace spark plugs
- ap1510p1580gh Replace spark plugs
- ap1510p1580h Replace spark plugs
- ap1510p1580l Replace spark plugs
- ar0100p130003ha Firing order
- ar6120p1105h Remove and install bottom engine compartment paneling
- as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
- as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)