ar0100l1200vb

Testing compression pressure

Type ar · topic 01.00 · version 0101 · 2006-07-26

Applies to: ENGINE 166.961 /991 in MODEL 414

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.00 General — Series 166 (models 961, 991) · Series 414

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.15 internal combustion engine, complete — Series 166 (models 961, 991) · Series 414

AR01.00-L-1200VB

Testing compression pressure

31.7.01

ENGINE 166.961 /991 in MODEL 414

Testing compression pressure

L01.00-0007-06

1 Compression recorder

2 Connector of crankshaft position sensor

N3/18 Control module with integrated throttle valve actuator

L5 Crankshaft position sensor

R4 Spark plug

Remove/install

1

Bring engine to operating temperature (approx. 80 °C )

Test compression pressure only when engine at normal operating temperature.

2

Remove spark plugs (R4)

Replace spark plugs

AP15.10-L-1580VB

3

Remove control module with integrated throttle valve actuator (N3/18)

Throttle valve cannot be opened manually.

AR07.53-L-1000VB

4

Unplug plug at control module with integrate throttle valve actuator (N3/18)

5

Crank engine at ignition lock

Crank engine several times to eliminate combustion residues in the cylinder.

Inspect

6

Insert compression recorder (1) into spark plug hole

*001589772100

7

Crank engine at ignition lock

Crank engine at least 8 revolutions in order to test compression pressure.

8

Carry out test procedure at the remaining cylinders in the same way

9

Compare measurments obtained with the specified pressures

Installation tolerance or value when new.

*BE01.00-P-1001-01E

Wear limit or limit value.

*BE01.00-P-1002-01E

Permissible difference between individual cylinders

*BE01.00-P-1003-01E

If the measurement is below the service limit or if the permissible difference between individual cylinders is exceeded:

Inspect cylinders for leaks

AR01.00-L-1300VB

10

Install in the reverse order

11

Read out DTC memory

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Diagnosis system STAR DIAGNOSIS

*WH58.30-Z-1048-13A

Test data of compression pressure

Number

Designation

Engine 166.961
ε=10,8

Engine 166.991
ε=10,8

BE01.00-P-1001-01E

Compression pressure installation tolerance or value when new

bar

13...17

13...17

BE01.00-P-1002-01E

Compression pressure wear limit or limit value

bar

11,5

11,5

BE01.00-P-1003-01E

Compression pressure of permissible difference between the individual cylinders

bar

1,5

1,5

Testing compression pressure

001 589 77 21 00

Compression recorder

Commercially available tools

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00

Referenced documents