AR07.53-L-1000VB | Remove/install control module for engine-control-monolith injection (ECM) | 27.7.01 |
ENGINE 166.940 /960 /990 in MODEL 168 as of 1.3.01
ENGINE 166.995 in MODEL 168
ENGINE 166.961 /991 in MODEL 414.700
L07.53-0013-06
1 Air intake scoop
2 Air intake hose
3 Fitted rubber gasket
4 Sealing ring
5 Screw
6 Dampener
7 Crankcase breather line
8 Screw
N3/18 ECM (engine control monolith) control module
| Remove/install | ||
1 | Remove air intake scoop (1) and air intake duct (2) | ||
2 | Detach crankcase breather line (7) from the dampener (6) | ||
3 | Detach dampener (6) from the air filter | Installation: Replace sealing ring (4). | |
4 | Detach connector from ECM control module (N3/18) | ||
5 | Detach ECM control module (N3/18) from the intake manifold | Installation: Replace sealing ring (3). | |
6 | Installation in reverse order | ||
7 | Read out diagnostic trouble code memory | ||
| Connect STAR DIAGNOSIS, read out diagnostic trouble code memory | ||
Diagnosis system STAR DIAGNOSIS |
Idle speed control (ISC)
Number | Identification | Engine 166.940/ | Engine 166.961/ | |
BA30.22-P-1001-01A | Bolt, idle speed control actuator to intake manifold | Nm | 7 | 7 |
Commercially available tools
Referenced documents
- ad0000p200004a Connect STAR DIAGNOSIS and read out fault memory
- ad0000p200004a