Secure vehicle on vehicle lift

AR00.60-S-0100S

Secure vehicle on vehicle lift

21.11.2019

Model

636, 639

Modification notes

30.03.2017

Method fully modified

Operation steps 1 to 17

Shown on retainer at front of vehicle

1

Tensioning strap

2

Guide rails

3

Support arms

Shown on retainer at left rear of vehicle

4

Tensioning strap

5

Supporting arm

6

Semi-trailing arm

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01A

Install front retainer

1

Position vehicle as centrally as possible between the vehicle lift columns

2

Move front seats to front-most position

3

Remove front passenger bench seat seat cushion support

Model 639.6/70
with code S23 (Co-driver's seat double seat)
Model 639.6/70
with code SH4 (Double seat bench on front passenger side, Comfort)

AR91.10-S-5035S

4

Raise vehicle

AR00.60-S-1000S

 Raise vehicle far enough until wheels are clear of ground.

5.1

Route suitable tensioning strap (1) below guide rails (2) of front seats along support arms (3) of vehicle lift

Model 639.6/70
except code S23 (Co-driver's seat double seat)
except code SH4 (Double seat bench on front passenger side, Comfort)

 The front doors can now no longer be closed. During longer operations, switch off interior lighting.

5.2

Route suitable tensioning strap (1) over front passenger bench seat and under guide rails (2) of driver's seat along to support arms (3) of vehicle lift

Model 639.6/70
with code S23 (Co-driver's seat double seat)
Model 639.6/70
with code SH4 (Double seat bench on front passenger side, Comfort)

 The front doors can now no longer be closed. During longer operations, switch off interior lighting.

6

Tension tensioning strap (1) using relevant ratchet


Only clamp tensioning strap (1) far enough to achieve sufficient tension for securing the vehicle.
This prevents damage.

 Store remaining tensioning strap (1) accordingly.



Check

7

Check retainer

If necessary



Retension tensioning strap (1).

Install rear retainer

8

Raise vehicle to full height

AR00.60-S-1000S

9

Route suitable tensioning strap (4), as shown, to support arm (5) and semi-trailing arm (6)

 Depending on the work involved on the vehicle, secure the respective side of the vehicle or both sides of the vehicle.

10

Tension tensioning strap (4) using relevant ratchet


Clamp tensioning strap (4) far enough only to achieve sufficient tension for securing the vehicle.
This prevents damage.



Check

11

Check retainer

If necessary



Retension tensioning strap (4).



Remove

12

Remove tensioning straps (1, 4) from support arms (3, 5)

13

Remove respective tensioning strap (4) from respective semi-trailing arm (6)

14

Lower vehicle

15

Remove tensioning strap (1) from vehicle interior



Install

16

Install seat cushion padding on front passenger bench seat

Model 639.6/70
with code S23 (Co-driver's seat double seat)
Model 639.6/70
with code SH4 (Double seat bench on front passenger side, Comfort)

AR91.10-S-5035S

17

Move front seats to original position