AP20.00-P-2010SM | Engine cooling system - inspect fluid level, adjust to correct level. Inspect anticorrosion/ antifreeze protection, adjust to correct concentration | 22.7.02 |
ENGINE 160.910 /920 in MODEL 450.3 /4
ENGINE 660.940 in MODEL 450.3 /4 (except , 450.418)
P20.00-2106-04
Shown on model 450.3
1 Cap
2 Expansion reservoir
| Check | ||
Danger! | Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles. Wear protective gloves, protective clothing and eye protection. | |
1.1 | Remove air inlet | On model 450.3 /4 except 450.418 | |
| |||
1.2 | Open windshield | In case of model 450.418 See Operating Instructions | |
2 | Turn down cap (1) of expansion reservoir (2) | Rotate one revolution counterclockwise, release overpressure, then remove screw cap (1) | |
3 | Check antifreeze and enter in maintenance sheet | In case of insufficient antifreeze: | |
-subject to separate repair order Fill up with antifreeze. | |||
| |||
| Coolant specifications | Sheet 310.1 | |
| Anticorrosion/antifreeze agents (Sheet 325.0) | Sheet 325.0 | |
| Notes on coolant | All engines | |
4 | Check coolant level in expansion reservoir (2), correct if necessary. | Coolant level must be set to MAX. In the event of fluid loss which is not due to normal consumption | |
-subject to separate repair order Inspect cooling system for leaks | |||
| Coolant specifications | Sheet 310.1 | |
| Anticorrosion/antifreeze agents | Sheet 325.0 | |
| Notes on coolant | All engines | |
5 | Seal expansion reservoir (2) with cap (1) | ||
6.1 | Install air inlet | On model 450.3 /4 except 450.418 | |
| |||
6.2 | Close windshield | In case of model 450.418 See Operating Instructions |
Antifreeze spindle
450 589 01 21 00
Referenced documents
- ah2000n208001a Notes on coolant
- ar6710p1000cr Remove/install windshield
- ar8325p1401sm Remove and install air inlet
- as2000z000101a Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.
- bb0040p031001a Coolant specifications
- bb0040p032500a Anticorrosion/antifreeze agents (Sheet 325.0)