Series
en
ap0020s0050ev
Major assemblies - check tightness and condition
Type ap · topic 00.20 · version 0106 · 2019-12-10
Applies to: Model 639.603/703 with engine 780.994 with code MA0 (E-CELL 60 kW)
Where it sits
Function group 0 Overall › 00 Overall vehicle › 00.20 Maintenance, service system (FSS, ASSYST) — Series 639 (models 603, 703)
EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.1 Basic information — Series 639 (models 603, 703)
EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.1 Basic information — Series 639 (models 603, 703)
EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.1 Basic information — Series 639 (models 603, 703)
EinPAS 17 Drivetrain/axle › 17.22 Transfer case › 17.22.1 Basic information — Series 639 (models 603, 703)
EinPAS 17 Drivetrain/axle › 17.30 Hydrostatic drive › 17.30.1 Basic information — Series 639 (models 603, 703)
EinPAS 17 Drivetrain/axle › 17.45 Power take-off › 17.45.1 Basic information — Series 639 (models 603, 703)
EinPAS 17 Drivetrain/axle › 17.50 Front axle › 17.50.1 Basic information — Series 639 (models 603, 703)
EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.1 Basic information — Series 639 (models 603, 703)
EinPAS 17 Drivetrain/axle › 17.52 Additional axle › 17.52.1 Basic information — Series 639 (models 603, 703)
EinPAS 35 Body/frame/detachable parts › 35.20 Cab/body › 35.20.1 Basic information — Series 639 (models 603, 703)
Also applies to engines/gearboxes: 780 994
AP00.20-S-0050EV
Major assemblies - check tightness and condition
06.12.2019
Model
639.603/703 with engine 780.994
with code MA0 (E-CELL 60 kW)
Danger
Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)
Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.
AS00.00-Z-0035-01A
Topical note
General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system
AH00.00-Z-0300-01A
Check
1
Visually inspect engine, transmission, reversing gear, front axle, rear axle, brake assemblies, steering and power steering pump for any leaks
If the leaks are severe with constant oil loss:
Rectify any leaks without delay and correct oil level subject to separate repair order.
2
Visually inspect housing of high-voltage battery for leaks, deformation, cracks and damage
Deformation to the housing up to 10 mm are permissible.
With greater deformation or if electrolyte is discharged:
Subject to separate repair order, replace high-voltage battery module.
Engine 780.994
AR54.10-S-1146EV
Referenced documents
ah0000z030001a General information on vehicles with high-voltage on-board electrical system
and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal
protective equipment
ar5410s1146ev Remove/install high-voltage battery module
as0000z003501a Risk of death when working on component parts and systems with U >= 30 V
alternating voltage (AC) or U >= 60 V direct voltage (DC)