ad0716s3000a

Common-Rail Diesel Injection (CDI) Diagnosis function check via actual values

Type ad · topic 07.16 · version 0100 · 2003-06-06

Applies to: ENGINE 611.980 in MODELS 638.094 /194 /294

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.16 Diesel injection system common rail — Series 611 (models 980) · Series 638 (models 094, 194, 294)

AD07.16-S-3000A

Common-Rail Diesel Injection (CDI) Diagnosis function check via actual values

25.6.02

ENGINE 611.980 in MODELS 638.094 /194 /294

Danger!

Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel.

Fire, sparks, open flames or smoking forbidden.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Danger!

Risk of fatal accident from vehicle slipping or toppling off the lift platform

Align the vehicle between the lift platform pillars and position the four support plates on the lift platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Danger!

Risk of accident from vehicle starting off by itself when engine running. Risk of injury as working around the engine during start-up or while running may result in contusions and burns

Secure vehicle to prevent it from moving off by itself.
Wear closed and tight-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

Do not unplug control unit sockets unless ignition switched off

Common rail diesel injection (CDI) diagnosis, previous knowledge

AD07.16-S-2000A

Connect Hand-Held Tester (HHT) and read out DTC memory

AD00.00-S-2000-03A

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-S-2000-04A

Notes on HHT diagnosis, CDI control functions

AD07.16-S-2000-19A

Notes on HHT diagnosis, CDI smooth running correction

AD07.16-S-2000-23A

Notes on HHT diagnosis, CDI irregular running

AD07.16-S-2000-24A

Fuses in order on front passenger-side fuse and relay module, connections plugged in

Battery voltage 11 up to 14 V

CDI system complete (all plug connections plugged in)

Ignition: OFF

Function test

Scope of test

Operation/requirement

Specification

Possible cause / Remedy

01

Start engine

AD07.16-S-3000-10A

02

Cold start

AD07.16-S-3000-03A

03

Warming-up phase

AD07.16-S-3000-04A

04

Check idle speed

AD07.16-S-3000-01A

05

Check engine

AD07.16-S-3000-02A

Referenced documents